Hyakken is the HY dev !

[hyakken]

Thank you Tadashi. A sequencer eh? Is it based on one of your M4L sequencers?

I'm making vst version of SEQ16 now.
I wanna release it early next year.

[bite_me]

Thank you Tadashi. A sequencer eh? Is it based on one of your M4L sequencers?

I'm making vst version of SEQ16 now.
I wanna release it early next year.

Great news

[bjporter]

Thanks for this thread! I was looking for the dev of HY-Mono.

We're doing HY-Mono for the 95th One Synth Challenge: viewtopic.php?p=6665674#p6665674

[.jon]

I ran into a non-critical bug with HY-Mono, the GUI started randomly showing the default JUCE elements and font. Live 9.7/Windows 10, with 6 instances of HY-Mono.

[Yeager]

I ran into a non-critical bug with HY-Mono, the GUI started randomly showing the default JUCE elements and font. Live 9.7/Windows 10, with 6 instances of HY-Mono.

Ha ! , good to know I'm not the only one with this bug, and it's not just FLStudio, did it look something like this ? :



I can make it look like this on command see here :
http://www.kvraudio.com/forum/viewtopic ... 0#p6563392

[.jon]

Yep, that's what it looks like, and now that you mention, it first appeared when I had two of them open in a stack.

[RuediRena]

Reposted from the OSC94 thread in the Instruments forum on here:

hyakken, if you still read this thread, do you have any advice for me? Is there sufficient information from my side? Seems, that I am not the only one. I wouldn't mind the blue font, but I mind the Reaper freezes and would dearly participate in the with this interesting plugin of yours.

TIA/Ruedi

Oh my!
My in most cases stable running system of Ubuntu 16.04 (32 bit)/Jack/Wine 1.6.2/Reaper 5.311/WineAsio is choking heavily on HY-Mono (32 bit) crashing Reaper every five minutes.
Advice anyone?
Greetings
Ruedi

Strange. I have a spare laptop with Ubuntu studio installed in it. I'll check it when i get time.

Thanks, Paree.

Some more information on my system as I've been a bit sloppy on my first post:
It is actually also Ubuntu Studio, i.e. I am running a lowlatency kernel and gdiplus is already installed.

Here is what Mono gui showed on the last trial of mine to shape a Kick. Had two duplicated instances running, one phase inverted and both FX windows were opened. Suddenly Reaper crashed, froze and Mono displayed on one of its GUIs (the one I was not working on) the following.

It is the original screenshot. Notice the suddenly blue tinted pots and the blackened rectangle under the VCF Modulation which should be Env2.
Buggy plugin compatibility mode was on on both instances, doesn't make a difference if it is on or off. Mono also crashes Reaper with only one instance. And every time the FX window is open, me changing patches on the fly while transport is active. I am playing around with the synth which is my normal procedure in this stage. Not with Mono
What is going on there?
Let's see if this bugger is to be resolved in the next days as I as well have the time and the motivation to do some HY-Mono audio engineering.

[hyakken]

I ran into a non-critical bug with HY-Mono, the GUI started randomly showing the default JUCE elements and font. Live 9.7/Windows 10, with 6 instances of HY-Mono.

Ha ! , good to know I'm not the only one with this bug, and it's not just FLStudio, did it look something like this ? :

[img]<span%20class="skimlinks-unlinked">http://www.kvraudio.com/forum/download/ ... 9036</span>[/img]

I can make it look like this on command see here :
<span class="skimlinks-unlinked">http://www.kvraudio.com/forum/viewtopic ... 3392</span>

Reposted from the OSC94 thread in the Instruments forum on here:

hyakken, if you still read this thread, do you have any advice for me? Is there sufficient information from my side? Seems, that I am not the only one. I wouldn't mind the blue font, but I mind the Reaper freezes and would dearly participate in the with this interesting plugin of yours.

TIA/Ruedi

Oh my!
My in most cases stable running system of Ubuntu 16.04 (32 bit)/Jack/Wine 1.6.2/Reaper 5.311/WineAsio is choking heavily on HY-Mono (32 bit) crashing Reaper every five minutes.
Advice anyone?
Greetings
Ruedi

Strange. I have a spare laptop with Ubuntu studio installed in it. I'll check it when i get time.

Thanks, Paree.

Some more information on my system as I've been a bit sloppy on my first post:
It is actually also Ubuntu Studio, i.e. I am running a lowlatency kernel and gdiplus is already installed.

Here is what Mono gui showed on the last trial of mine to shape a Kick. Had two duplicated instances running, one phase inverted and both FX windows were opened. Suddenly Reaper crashed, froze and Mono displayed on one of its GUIs (the one I was not working on) the following.

It is the original screenshot. Notice the suddenly blue tinted pots and the blackened rectangle under the VCF Modulation which should be Env2.
Buggy plugin compatibility mode was on on both instances, doesn't make a difference if it is on or off. Mono also crashes Reaper with only one instance. And every time the FX window is open, me changing patches on the fly while transport is active. I am playing around with the synth which is my normal procedure in this stage. Not with Mono
What is going on there?
Let's see if this bugger is to be resolved in the next days as I as well have the time and the motivation to do some HY-Mono audio engineering.

[img]<span%20class="skimlinks-unlinked">https://dl.dropboxusercontent.com/u/304 ... .png</span>[/img]

I ran into a non-critical bug with HY-Mono, the GUI started randomly showing the default JUCE elements and font. Live 9.7/Windows 10, with 6 instances of HY-Mono.

Sorry for late reply.
I will update HY-Mono next.
Please wait for while.

Thank you.

[RuediRena]

Sorry for late reply.
I will update HY-Mono next.
Please wait for while.

Thank you.

This is great news, hyakken. Folks over at OSC will appreciate your effort dearly.

Greetings
Ruedi

[Taron]

AH, here you are!

Hey hyakken,
OSC should really have a link right to your thread, hehe. Anyway, I hope you don't mind some quick feedback, if you decide to fix HY-Mono a little more. It's a fun little beasty, but has a few mean troubles. I'll just give you a quick list:

• The filter envelope having an attack, even if it's a 0. (very unfortunate!)
• The DC offset the filter's resonance creates with a saw wave oscillator. (I sympathize with the coding pains!)
• Retrigger only seems to retrigger Env 1, but should also retrigger Env 2
• MIDI modulation Targets could include LFO depth. Might be easiest to globalize it that way. But what you currently have as VCO1 and 2 should really control their "MODULATION" dial (or amount) to reduce the confusion. Currently it is some sort of supplemental pitch bending and feels a bit accidental.
• Portamento AUTO mode to only have it glide between connected notes.
• LFO modes, if only just a choice between SINE and TRIangle, would really help!

There are a few mysterious things that I don't understand, such as a loss of association between DAW's automation lane and the chosen parameter on the synth. I don't quite know what's missing in your code that this could happen, but I think, something must be a little out of sorts?! I'd go through all the parameter and host connection to them. This is tricky and annoying stuff to program, I know it already, but it's vital, too!

Anyway, I was bitching a bit early on (still am some, sorry), I'm deadly afraid to close my project, not knowing what it will sound like when I open it again, but while I'm doing my track, I'm actually enjoying what comes out of this! That makes me really hope you'll give HY-Mono a good hard look, because it very well deserves it and you'll certainly deserve what will come out of the OSC! It'll be fun, I'm sure!

Thanks for doing what you do!

[hyakken]

Hello,

Here is new beta version.

Win
http://www.mediafire.com/file/5cioratoi ... ta_win.zip

Mac
http://www.mediafire.com/file/515iosfmm ... ta_mac.zip

I changed lots of code very quickly.
It might have some mistakes.
And new GUI is still in the middle of making,
so some features are not available.

Please test it.

Thank you.

[hyakken]

AH, here you are!

Hey hyakken,
OSC should really have a link right to your thread, hehe. Anyway, I hope you don't mind some quick feedback, if you decide to fix HY-Mono a little more. It's a fun little beasty, but has a few mean troubles. I'll just give you a quick list:

• The filter envelope having an attack, even if it's a 0. (very unfortunate!)
• The DC offset the filter's resonance creates with a saw wave oscillator. (I sympathize with the coding pains!)
• Retrigger only seems to retrigger Env 1, but should also retrigger Env 2
• MIDI modulation Targets could include LFO depth. Might be easiest to globalize it that way. But what you currently have as VCO1 and 2 should really control their "MODULATION" dial (or amount) to reduce the confusion. Currently it is some sort of supplemental pitch bending and feels a bit accidental.
• Portamento AUTO mode to only have it glide between connected notes.
• LFO modes, if only just a choice between SINE and TRIangle, would really help!

There are a few mysterious things that I don't understand, such as a loss of association between DAW's automation lane and the chosen parameter on the synth. I don't quite know what's missing in your code that this could happen, but I think, something must be a little out of sorts?! I'd go through all the parameter and host connection to them. This is tricky and annoying stuff to program, I know it already, but it's vital, too!

Anyway, I was bitching a bit early on (still am some, sorry), I'm deadly afraid to close my project, not knowing what it will sound like when I open it again, but while I'm doing my track, I'm actually enjoying what comes out of this! That makes me really hope you'll give HY-Mono a good hard look, because it very well deserves it and you'll certainly deserve what will come out of the OSC! It'll be fun, I'm sure!

Thanks for doing what you do!

About automation issue.
Could you try new beta?
I would like to know new beta version still has this issue or not.

[Taron]

Will try it right away!
Check VCO 2 GUI-section... it still says Env1, but it really is Env2!

HY-MonoVCO2env2.jpg

[Taron]

Ok, seems like the parameter automation sticks now.
ALSO, seems like you've fixed the Env2 retrigger, which is beautiful!

Now, if you could get the envelopes to have 0 attack, rather than a soft one, it would be great! You could, if you were concerned about a click, make a ramp at some fraction of the frequency of the sound, be it a quarter or so, but they should have the power to pop.

By the way, I really like the look you're going for! I, by the way, also had the funny surprise GUI design change with more than one instance open, hehehe. Funny stuff. That seems to be fixed, too!
...love the scaling ability for sure! Super well done!

[hyakken]

Ok, seems like the parameter automation sticks now.
ALSO, seems like you've fixed the Env2 retrigger, which is beautiful!

Now, if you could get the envelopes to have 0 attack, rather than a soft one, it would be great! You could, if you were concerned about a click, make a ramp at some fraction of the frequency of the sound, be it a quarter or so, but they should have the power to pop.

By the way, I really like the look you're going for! I, by the way, also had the funny surprise GUI design change with more than one instance open, hehehe. Funny stuff. That seems to be fixed, too!
...love the scaling ability for sure! Super well done!

Thank you for your testing.

about 0 attack
I will try this next.