u-he

Beamboom · Post by **Beamboom** » Fri Jan 19, 2018 12:06 pm

vincenzoml wrote:thanks, I will check backwards from here, would be cool if there was a permanent link to a page with links to the latest versions

Yes that's practically a neccessity. The first post used to be updated when new versions were avbailable, and Abique did promise to do so now too, once the current builds reach a stable level.

octave9 · Post by **octave9** » Tue Jan 23, 2018 9:38 am

abique wrote:Hi,
Don't worry guys, builds are coming by the end of the week.
I'm just quite busy these days
Have all a nice week,
Alex

Which week?

Or have I missed it?

abique · Post by **abique** » Tue Jan 23, 2018 3:22 pm

Hello,

I'll publish the latest build once Bitwig 2.3 Beta 1 is out.

Alex

kapsap · Post by **kapsap** » Tue Jan 23, 2018 3:56 pm

abique wrote:Hello,

I'll publish the latest build once Bitwig 2.3 Beta 1 is out.

Alex

Hmm, this rings some alarm bells for me. Will the next build only work with Bitwig? What's the state of affairs with other plugin hosts and DAWs (Ardour, Mixbus, Carla, Qtractor, Reaper, Tracktion etc.)? Which are supposed to work, which are not? For those that do not work correctly with Repro have there been feature requests to support Repro's UI handling in the future.

You see, I'm actually getting nervous as I'm an Ardour, Mixbus and Carla user and only the very first beta has been working acceptably here.

Subarumannen · Post by **Subarumannen** » Tue Jan 23, 2018 5:37 pm

kapsap wrote:
abique wrote:Hello,

I'll publish the latest build once Bitwig 2.3 Beta 1 is out.

Alex
Hmm, this rings some alarm bells for me. Will the next build only work with Bitwig? What's the state of affairs with other plugin hosts and DAWs (Ardour, Mixbus, Carla, Qtractor, Reaper, Tracktion etc.)? Which are supposed to work, which are not? For those that do not work correctly with Repro have there been feature requests to support Repro's UI handling in the future.

You see, I'm actually getting nervous as I'm an Ardour, Mixbus and Carla user and only the very first beta has been working acceptably here.

My feeling is that you will have to change things on your end to be able to run the plugins. The changes might be anything from OS, distro, host and specific libraries it seems.
I am not bashing anyone but the way this is heading AFAIK is towards compability issues,

I have a lot of other stuff where the developers have decided to build their products with as old libraries and compilers as possible and bundle the essential required shared libraries with the plugin/software to make the product as usable as possible in as many environments as possible. A very nice way to make stuff stable and portable.

I am no developer but that approach seems to me the best way to achieve the best end user experience.

Sadly, I do not think that is the way we are heading regarding U-he linux stuff unfortunately.

I am equally nervous.

Best regards, Anders

bilbobugginz · Post by **bilbobugginz** » Tue Jan 23, 2018 6:49 pm

hi, I've downloaded Repro-1 beta off u-he.com yesterday.
I'm on Ubuntu 17.10, amd64, BitWig 2.2.3,
installed using the installer script.

I can see the plugin listed, and it shows the gui, It even plays.

The problem is I cannot register it.
The gray dialog for "purchase" or "register" does not respond to my clicks on "register". nothing happens.

I looked in the installed wrapper script, and tried running it with parameters, most would fail with SIGSEGV, and specifically 'register' did the same.

Did I do something wrong? Am I missing a library? (I didn't run ldd, maybe I should)

Help would be nice.

Subarumannen · Post by **Subarumannen** » Tue Jan 23, 2018 7:20 pm

bilbobugginz wrote:hi, I've downloaded Repro-1 beta off u-he.com yesterday.
I'm on Ubuntu 17.10, amd64, BitWig 2.2.3,
installed using the installer script.

I can see the plugin listed, and it shows the gui, It even plays.

The problem is I cannot register it.
The gray dialog for "purchase" or "register" does not respond to my clicks on "register". nothing happens.

I looked in the installed wrapper script, and tried running it with parameters, most would fail with SIGSEGV, and specifically 'register' did the same.

Did I do something wrong? Am I missing a library? (I didn't run ldd, maybe I should)

Help would be nice.

The one on first page is ancient. That beta was before Repro-1 was even released as stable.
Try the one on the official U-he site
https://uhedownloads-heckmannaudiogmb.n ... nux.tar.gz

Or try the one I am using
Build 6824. That's the last one I can run on my system

You should be able to enter the license in the file in ~/.uhe/Repro-1/Support/com.u-he.Repro-1.user

the format is:
Username
xxxx-xxxxxx-xxxxxx-xxxxxx

mclstr · Post by **mclstr** » Tue Jan 23, 2018 11:45 pm

bilbobugginz wrote: The problem is I cannot register it.
The gray dialog for "purchase" or "register" does not respond to my clicks on "register". nothing happens.

Are you sure it isn't already registered from a previous version.
Is it making the the usual demo crackling sound when you use it?

Subarumannen · Post by **Subarumannen** » Wed Jan 24, 2018 12:32 am

The path to the plugin and prefs changed sometime between early version and later. That could be the case.

vincenzoml · Post by **vincenzoml** » Wed Jan 24, 2018 6:43 am

Guys I'm tired of hearing that horrible noise and considering buying anyway

Is there a workaround for the "can't see menus, can't set interface zoom" problem on ubuntu 17.10 in version 4408 (of diva but I suspect all the others)? I don't have windows so my investment is for linux only.

Subarumannen · Post by **Subarumannen** » Wed Jan 24, 2018 6:53 am

vincenzoml wrote:Guys I'm tired of hearing that horrible noise and considering buying anyway Is there a workaround for the "can't see menus, can't set interface zoom" problem on ubuntu 17.10 in version 4408 (of diva but I suspect all the others)? I don't have windows so my investment is for linux only.

There is a newer build of Diva available just FYI but I don't think that solves the problem. Go ahead and buy, I have done that even if I have to carefully select builds to be able to use them. I use them live so that makes me a bit picky about what's happening from now on.

Best regards, Anders

vincenzoml · Post by **vincenzoml** » Wed Jan 24, 2018 8:26 am

Yes I've tried the new builds... they add more problems at the moment so if I buy now I'm only keeping into account 4408

vincenzoml · Post by **vincenzoml** » Wed Jan 24, 2018 8:51 am

But before I buy... I have to be able to insert that serial number into something... bazille is already registered since a long time in my setup, but for Diva, I can't enter the serial (I guess it's as in some post above). We really need those menus back. In the meantime I can use diva through linvst but the cpu/buffer load is much higher @abique anything to add about this? Is it fixed in your current code?

ejgallego · Post by **ejgallego** » Wed Jan 24, 2018 8:56 am

A workaround to missing menus is to use the mouse wheel to change settings. Cheers!

vincenzoml · Post by **vincenzoml** » Wed Jan 24, 2018 10:27 am

That does not work for setting the zoom level... I have a 1920x1024 display on my laptop

u-he

KVR Audio

Linux public beta (4408)