Hyakken is the HY dev !

VST, AU, etc. plug-in Virtual Effects discussion
User avatar
Doc Brown
KVRist
412 posts since 13 May, 2012 from Minnesota

Post Sat Apr 14, 2018 4:49 am

Do any of these sequencers have ratcheting or step division yet?

ENV1
KVRAF
2328 posts since 31 Aug, 2011

Re: Hyakken is the HY dev !

Post Sat Apr 14, 2018 6:03 am

Some more observations about MONO.

• Host-Synced Delay is not really synced. While the readout is changing from ms to rate when Sync is selected, moving the knob within the range of the displayed rate still alters the delays frequency just as it would in non-synced milliseconds mode.

• There is something seriously odd going on with the Decay stages. Strange as it may sound, but dialling in the Decay is more like dialling in Attack, i.e. it has much more of the character of adding Attack than it has Decay. Since this is best demonstrated by audio i have uploaded a short comparison clip to MONOs KVR entry. (To avoid having to use an off-site filehoster.) First V-Station, then MONO. This was the 'fastest' decay MONO was capable of. (Like i said, it sounds like there is a pound of attack on it but thats the decay only.) The clip will be removed when no longer needed. Download here.


PS: Both synths were triggered by the same instance of SEQ16x3v2 and routed into HY-Delay3.

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Wed Apr 18, 2018 10:35 pm

Doc Brown wrote:Do any of these sequencers have ratcheting or step division yet?
After midi learn, I will look into step sub-division.
ENV1 wrote:Some more observations about MONO.

• Host-Synced Delay is not really synced. While the readout is changing from ms to rate when Sync is selected, moving the knob within the range of the displayed rate still alters the delays frequency just as it would in non-synced milliseconds mode.

• There is something seriously odd going on with the Decay stages. Strange as it may sound, but dialling in the Decay is more like dialling in Attack, i.e. it has much more of the character of adding Attack than it has Decay. Since this is best demonstrated by audio i have uploaded a short comparison clip to MONOs KVR entry. (To avoid having to use an off-site filehoster.) First V-Station, then MONO. This was the 'fastest' decay MONO was capable of. (Like i said, it sounds like there is a pound of attack on it but thats the decay only.) The clip will be removed when no longer needed. Download [url=<span class="skimlinks-unlinked">http://www.kvraudio.com/product/hy-mono ... oads</span>]here[/url].


PS: Both synths were triggered by the same instance of SEQ16x3v2 and routed into HY-Delay3.
Honestly I don't remember the detail of this synth since I made this one some years ago.
And its code is very messy.
I will check those things when I have time.

Edit:
about Coarse knob of HY-Mono
It seems auto center adjust causes "-2st" issue.
I will try to fix this one.

teacue
KVRian
516 posts since 22 Jun, 2003 from Germany

Re: Hyakken is the HY dev !

Post Sun Apr 22, 2018 5:09 am

Oh, I just saw that Seq16x3v2 has been updated to 1.0.5
Added light skin mode (full version)
Added snapshot bank (full version)
Improved trigger timing of the first step of a bar (full/free version)
Output Min/Range control for SEQ3 didn’t work correctly(fixed)
few minor changes
Snapshot bank is really great, now we can have 48 snapshots!
Thanks for this :)
teacuemusic (Musicals)
youtube

Halonmusic
KVRAF
1598 posts since 13 Nov, 2015 from Norway

Re: Hyakken is the HY dev !

Post Sun Apr 22, 2018 5:35 am

ENV1 wrote:Some more observations about MONO.

• Host-Synced Delay is not really synced. While the readout is changing from ms to rate when Sync is selected, moving the knob within the range of the displayed rate still alters the delays frequency just as it would in non-synced milliseconds mode.

• There is something seriously odd going on with the Decay stages. Strange as it may sound, but dialling in the Decay is more like dialling in Attack, i.e. it has much more of the character of adding Attack than it has Decay. Since this is best demonstrated by audio i have uploaded a short comparison clip to MONOs KVR entry. (To avoid having to use an off-site filehoster.) First V-Station, then MONO. This was the 'fastest' decay MONO was capable of. (Like i said, it sounds like there is a pound of attack on it but thats the decay only.) The clip will be removed when no longer needed. Download here.


PS: Both synths were triggered by the same instance of SEQ16x3v2 and routed into HY-Delay3.
Yes the decay is strange indeed. Can't use it for bass sounds because of this. That's just me though.

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Wed May 16, 2018 8:07 am

tapiodmitriyevich wrote:
hyakken wrote:And I added random step order mode to RPE based on this suggestion.
I think it has a bug. I used a triplet in the permutation mode (?!) in one block and observed it for like 100 beats. I set 1=on, 2=on, 3=off if that is important.
->
It played 1,2,3 and 2,1,3 numerous times, lots of repetitions... may be due to randomness.
BUT: it ALWAYS played the 3 as the last one.
I fixed this one in this update.
Please try latest one.

And fixed coarse knob of HY-Mono.

Tadashi

tapiodmitriyevich
KVRist
310 posts since 15 Jan, 2017 from 127.0.0.1

Re: Hyakken is the HY dev !

Post Wed May 16, 2018 7:53 pm

Thanks, Tadashi! Since you are using randomness... maybe you can put some thought into conditional midi creation. "if condition x is met, play y". IDK if it will always lead to a complicated product, a sound programming language nobody uses (and max/msp already exists) - but still I feel it may be worth a thought, because all midi creators currently IMO always have no conditions.
Just thinking loud. :D

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Wed May 16, 2018 9:18 pm

tapiodmitriyevich wrote:Thanks, Tadashi! Since you are using randomness... maybe you can put some thought into conditional midi creation. "if condition x is met, play y". IDK if it will always lead to a complicated product, a sound programming language nobody uses (and max/msp already exists) - but still I feel it may be worth a thought, because all midi creators currently IMO always have no conditions.
Just thinking loud. :D
Do you have any examples about conditional stuff?

HY-Mono v1.5.5 has plugin crash issue on changing presets (only for Windows version).
V1.5.51 fixed that issue.
So if you use v1.5.5, please update to v1.5.51.

Tadashi

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Thu May 17, 2018 10:51 am

For Cubase user, if you use ASIO-Guard, please change its level to "normal" or "low".
This setting affects to the clock of my sequencer.

Tadashi

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Thu May 17, 2018 10:53 am

Sorry double post, please delete it.
Last edited by hyakken on Thu May 17, 2018 11:00 am, edited 1 time in total.

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Thu May 17, 2018 10:53 am

Sorry double post, please delete it.
Last edited by hyakken on Thu May 17, 2018 11:01 am, edited 2 times in total.

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Thu May 17, 2018 10:59 am

Sorry double post, please delete it.

hyakken
KVRist
191 posts since 21 Dec, 2015 from Japan

Re: Hyakken is the HY dev !

Post Thu Jun 14, 2018 8:07 pm

I just released new one.
Please check it.
Image

https://hy-plugins.com/product/hy-slicerwin-mac/

Thank you,
Tadashi

User avatar
pekbro
KVRAF
1964 posts since 29 Sep, 2010 from Maui

Re: Hyakken is the HY dev !

Post Thu Jun 14, 2018 8:55 pm

Awesome! :tu:

s28
KVRist
100 posts since 9 Aug, 2017

Re: Hyakken is the HY dev !

Post Thu Jun 14, 2018 9:40 pm

That looks very nice indeed - will check that out soon Tadeshi.

Return to “Effects”