KVR Audio

Hermetech Mastering · Post by **Hermetech Mastering** » Thu Dec 27, 2018 5:11 pm

Cinebient wrote: Tue Dec 25, 2018 9:55 am Oh and of course much thank‘s to the OP for the works he puts into it. Deserves of course more than another X vs.Y troll message.

This, poor OP! Thanks so much, been diving into Tyrell recently and really loving it, so this new series is perfect for me.

zygomatic · Post by **zygomatic** » Fri Dec 28, 2018 7:39 am

You're very welcome, Hermetech Mastering. I hope you'll find this series useful. If there's anything you'd like me to include in the videos or do a dedicated video about, please let me know and I'll consider it. Please like it and subscribe.

Hermetech Mastering · Post by **Hermetech Mastering** » Fri Dec 28, 2018 9:31 am

I need to dig deeper and buy a keyboard controller before fully engaging with it, but it looks very deep and seems to sound very good for a freebie.

I would like and subscribe if I had a Google account, but I don't.

dupont · Post by **dupont** » Fri Dec 28, 2018 6:13 pm

Anybody get stuck notes with Tyrell N6 and Reaper with OSX ?

zygomatic · Post by **zygomatic** » Fri Dec 28, 2018 10:23 pm

Hermetech Mastering wrote: Fri Dec 28, 2018 9:31 am I need to dig deeper and buy a keyboard controller before fully engaging with it, but it looks very deep and seems to sound very good for a freebie.

The synth is almost too good to be true, isn't it?
You can also take advantage of the Tyrell's user manual. It's up at the synth's official website. The link is in the video's description.

Hermetech Mastering wrote: Fri Dec 28, 2018 9:31 am I would like and subscribe if I had a Google account, but I don't.

I understand.

chk071 · Post by **chk071** » Fri Dec 28, 2018 10:42 pm

Hermetech Mastering wrote: Fri Dec 28, 2018 9:31 am I would like and subscribe if I had a Google account, but I don't.

Subscribe to this thread, and you'll be up to date.

zygomatic · Post by **zygomatic** » Sat Dec 29, 2018 7:47 am

Good one, chk071! Great idea!

.jon · Post by **.jon** » Sun Dec 30, 2018 11:08 am

Quality content, zygomatic! Nice tip and we'll presented. You could make the edit (fade to blacks) a lot snappier though, the cuts felt very slow to me. Obviously just an irrelevant little detail, top notch stuff otherwise and looking forward to more episodes!

I've resorted to Tyrell N6 for classic analog poly pads while I make my mind about which HW polysynth I'll get, it does some things better and some things worse than xhip and KX-Polymod.

zygomatic · Post by **zygomatic** » Sun Dec 30, 2018 8:24 pm

.jon wrote: Sun Dec 30, 2018 11:08 am Quality content, zygomatic! Nice tip and we'll presented.

.jon wrote: Sun Dec 30, 2018 11:08 am looking forward to more episodes!

Thanks so much, .jon. I'm really glad you enjoyed it and found it useful.

Stay tuned for more and please be patient. I'm still new to this video making business and it requires me putting in a lot of hours to deliver 'em.

.jon wrote: Sun Dec 30, 2018 11:08 am You could make the edit (fade to blacks) a lot snappier though, the cuts felt very slow to me. Obviously just an irrelevant little detail

Thank you for the input. There's no bad suggestion, as far as I'm concerned. I'll seriously take it under advisement. I'm, in fact, for the first time in my life doing something like this.

On the other hand, even though the videos in this series are going to be short, I'd still like them to retain that somewhat dark and cinematic vibe and scenery reminiscent of the original Blade Runner movie just so that everything has a common theme.

.jon wrote: Sun Dec 30, 2018 11:08 am I've resorted to Tyrell N6 for classic analog poly pads while I make my mind about which HW polysynth I'll get, it does some things better and some things worse than xhip and KX-Polymod.

Which hardware polysynths are you considering?

.jon · Post by **.jon** » Sun Dec 30, 2018 9:07 pm

zygomatic wrote: Sun Dec 30, 2018 8:24 pm Thank you for the input. There's no bad suggestion, as far as I'm concerned. I'll seriously take it under advisement. I'm, in fact, for the first time in my life doing something like this. On the other hand, even though the videos in this series are going to be short, I'd still like them to retain that somewhat dark and cinematic vibe and scenery reminiscent of the original Blade Runner movie just so that everything has a common theme.

Believe it or not, the slow fade to blacks is something most people do when editing videos for the fist time. Anyways, it's certainly not a mistake or anything like that, just something not very common in these days. If it's your style, just stick with it

Which hardware polysynths are you considering?

Novation Peak is currently the number one contender for me, I like the sound and it seems quite versatile. I have two DSI synths already which kind of leaves the extremely viable Prophet Rev 2 out, could do with some variety. Unless I part with my Mopho SE and go for the REV 2 keyboard, the Mopho is my main controller now. Or keep the Mopho and get a Prophet 12 desktop, which is totally different but so very tempting for my style

as you see, no easy choices. I'm not VCO obsessed and need more than 6 voices.

zygomatic · Post by **zygomatic** » Mon Dec 31, 2018 8:58 am

.jon wrote: Sun Dec 30, 2018 9:07 pm Believe it or not, the slow fade to blacks is something most people do when editing videos for the fist time. Anyways, it's certainly not a mistake or anything like that, just something not very common in these days. If it's your style, just stick with it

While making those longer fades I was also considering making the timestamps for easier navigation. It's also a neat way of skipping the fades altogether.

And ultimately if someone's so anxious to get to the end of the video there the speed feature.

Novation Peak is currently the number one contender for me, I like the sound and it seems quite versatile. I have two DSI synths already which kind of leaves the extremely viable Prophet Rev 2 out, could do with some variety. Unless I part with my Mopho SE and go for the REV 2 keyboard, the Mopho is my main controller now. Or keep the Mopho and get a Prophet 12 desktop, which is totally different but so very tempting for my style as you see, no easy choices. I'm not VCO obsessed and need more than 6 voices.

It's all well and good but hardware synths are simply out of my reach for the moment.

Have you ever felt limited with Tyrell's maximum number of voices? Are 8 voices really enough?

zygomatic · Post by **zygomatic** » Wed Jan 02, 2019 10:27 pm

dupont wrote: Fri Dec 28, 2018 6:13 pm Anybody get stuck notes with Tyrell N6 and Reaper with OSX ?

I'm using running Tyrell within Reaper as well but on Windows 10 and didn't notice anything similar happening.

zygomatic · Post by **zygomatic** » Mon Jan 07, 2019 6:23 pm

A nice Tyrell programming master class!

XeonKnight · Post by **XeonKnight** » Mon Jan 07, 2019 6:46 pm

dave dove wrote: Tue Dec 25, 2018 11:24 am @zygomatic
Nice vid - looking forward to more

Tyrell is dead versatile, straightforward, great sounding and free
which makes it ideal for synthesis tutorials
I used it for some drum synthesis tuts a few years ago
its also Win, Mac and Linux so most people have access and can follow along...

some people just like to moan from the corner
ignore them

merry xmass

Dave

Are the drum tutorials still available? Drums are probably what I struggle with the most and definitely have derailed countless OSC attempts for me!

XeonKnight · Post by **XeonKnight** » Mon Jan 07, 2019 6:59 pm

Great video! I never knew Tyrell even had that feature. What is the deal with it not assignable from the dropdown?

Tyrell N6 Quick Tip YouTube video series