"Neumann" GUI for Zebra²/Zebralette

Official support for: u-he.com
dayjob
KVRian
1385 posts since 6 Nov, 2006

Post Fri Nov 29, 2019 12:47 pm

awesome. thanks!

User avatar
gentleclockdivider
KVRAF
2271 posts since 22 Mar, 2009 from gent

Re: "Neumann" GUI for Zebra²/Zebralette

Post Sun Dec 01, 2019 2:54 am

I downloaded the demo of Neumann ( zebra is registered )
Still it doesn't show up ( placed it in the correct folder )


Image
Eyeball exchanging
Soul calibrating ..frequencies

WoF2302
KVRer
1 posts since 23 Feb, 2019

Re: "Neumann" GUI for Zebra²/Zebralette

Post Sun Dec 01, 2019 8:04 am

Hi,

did I see something over there or is the button for fx bypass really missing? I have the last version for Zebra 2.9 "installed" and wanted to bridge the FX section.

Thank you for the many good and clear skins of you.
Greetings Wolfgang

Funkybot's Evil Twin
KVRAF
6782 posts since 16 Aug, 2006

Re: "Neumann" GUI for Zebra²/Zebralette

Post Sun Dec 01, 2019 11:09 am

gentleclockdivider wrote:
Sun Dec 01, 2019 2:54 am
I downloaded the demo of Neumann ( zebra is registered )
Still it doesn't show up ( placed it in the correct folder )
Where exactly is the correct folder? Is it under Zebra2.data\Support\Themes\[THEME NAME]?

If yes...

1. Is it possible you have more than one Zebra2.data folder? It's easy with the older installers to get multiple versions of the data folder which creates GUI problems.

If no...

2. Did you remove/close all instances of Zebra2 after adding the skin to the data folder, then relaunch it? Skin changes don't actually appear until the plugin has been fully closed and reloaded.

After that I got nothing else... :lol:

User avatar
plugmon
KVRist
170 posts since 3 Mar, 2015 from Tokyo

Re: "Neumann" GUI for Zebra²/Zebralette

Post Sun Dec 01, 2019 10:02 pm

gentleclockdivider wrote:
Sun Dec 01, 2019 2:54 am
I downloaded the demo of Neumann ( zebra is registered )
Still it doesn't show up ( placed it in the correct folder )


Image
The most probable cause is wrong folder structure. Please tell me which folder you dropped ("Install Neumann", "Theme to install" or just "Neumann") as well as where you dropped it.
The screenshot of folder structure also helps a lot.
ImageFully new GUI for Zebra², Neumann is released! | Follow me on Twitter

User avatar
plugmon
KVRist
170 posts since 3 Mar, 2015 from Tokyo

Re: "Neumann" GUI for Zebra²/Zebralette

Post Sun Dec 01, 2019 10:07 pm

WoF2302 wrote:
Sun Dec 01, 2019 8:04 am
Hi,

did I see something over there or is the button for fx bypass really missing? I have the last version for Zebra 2.9 "installed" and wanted to bridge the FX section.

Thank you for the many good and clear skins of you.
Greetings Wolfgang
Wooooo I totally forgot that!! Thanks for letting me notice it. I'll fix it very soon!
ImageFully new GUI for Zebra², Neumann is released! | Follow me on Twitter

User avatar
gentleclockdivider
KVRAF
2271 posts since 22 Mar, 2009 from gent

Re: "Neumann" GUI for Zebra²/Zebralette

Post Mon Dec 02, 2019 6:57 am

plugmon wrote:
Sun Dec 01, 2019 10:02 pm
gentleclockdivider wrote:
Sun Dec 01, 2019 2:54 am
I downloaded the demo of Neumann ( zebra is registered )
Still it doesn't show up ( placed it in the correct folder )


Image
The most probable cause is wrong folder structure. Please tell me which folder you dropped ("Install Neumann", "Theme to install" or just "Neumann") as well as where you dropped it.
The screenshot of folder structure also helps a lot.
I dropped it in the correct gui folder
found under user /zebra2 data /support/themes
Image
Still no luck
Eyeball exchanging
Soul calibrating ..frequencies

User avatar
#rob
KVRian
561 posts since 20 Aug, 2013

Re: "Neumann" GUI for Zebra²/Zebralette

Post Mon Dec 02, 2019 6:59 am

gentleclockdivider wrote:
Mon Dec 02, 2019 6:57 am
Still no luck
What's inside the "Neuman-Trial" folder?
Cheers,
Rob
u-he | Support | FAQ | Patch Library

User avatar
gentleclockdivider
KVRAF
2271 posts since 22 Mar, 2009 from gent

Re: "Neumann" GUI for Zebra²/Zebralette

Post Mon Dec 02, 2019 8:00 am

#rob wrote:
Mon Dec 02, 2019 6:59 am
gentleclockdivider wrote:
Mon Dec 02, 2019 6:57 am
Still no luck
What's inside the "Neuman-Trial" folder?
Thank you verry much ..Now I feel like an idiot :D
All good now :tu:
Eyeball exchanging
Soul calibrating ..frequencies

User avatar
plugmon
KVRist
170 posts since 3 Mar, 2015 from Tokyo

Re: "Neumann" GUI for Zebra²/Zebralette

Post Mon Dec 02, 2019 8:21 am

gentleclockdivider wrote:
Mon Dec 02, 2019 8:00 am
#rob wrote:
Mon Dec 02, 2019 6:59 am
gentleclockdivider wrote:
Mon Dec 02, 2019 6:57 am
Still no luck
What's inside the "Neuman-Trial" folder?
Thank you verry much ..Now I feel like an idiot :D
All good now :tu:
I have to admit that the folder name was confusing, making you think that the top folder itself was a theme folder. I changed the folder name to "Install Neumann Demo" so that no such confusion may happen in future. thanks :wink:
ImageFully new GUI for Zebra², Neumann is released! | Follow me on Twitter

User avatar
plugmon
KVRist
170 posts since 3 Mar, 2015 from Tokyo

Re: "Neumann" GUI for Zebra²/Zebralette

Post Mon Dec 02, 2019 8:42 pm

Just updated the skin (v1.1.2/v1.2.2) and Bypass FX button is added in the header.

Image
ImageFully new GUI for Zebra², Neumann is released! | Follow me on Twitter

filulilu
KVRist
48 posts since 27 Aug, 2009

Re: "Neumann" GUI for Zebra²/Zebralette

Post Tue Dec 03, 2019 1:13 am

plugmon wrote:
Mon Dec 02, 2019 8:42 pm
Just updated the skin (v1.1.2/v1.2.2) and Bypass FX button is added in the header.
I just downloaded from the 1.2.2 link but it seems that it still is 1.2.1
You do not have the required permissions to view the files attached to this post.
Yorgos Simeonidis

User avatar
plugmon
KVRist
170 posts since 3 Mar, 2015 from Tokyo

Re: "Neumann" GUI for Zebra²/Zebralette

Post Tue Dec 03, 2019 6:00 am

filulilu wrote:
Tue Dec 03, 2019 1:13 am
plugmon wrote:
Mon Dec 02, 2019 8:42 pm
Just updated the skin (v1.1.2/v1.2.2) and Bypass FX button is added in the header.
I just downloaded from the 1.2.2 link but it seems that it still is 1.2.1
Somehow I seem to have uploaded a wrong one!! Now it must be fixed.
ImageFully new GUI for Zebra², Neumann is released! | Follow me on Twitter

tapekiller
KVRist
79 posts since 6 Nov, 2014

Re: "Neumann" GUI for Zebra²/Zebralette

Post Thu Dec 05, 2019 3:30 am

Very good job on the skin, it's very very well made.
I just noted that the MSEG expanded view doesn't have the "close/minimize" icon on the upper right like the oscillator editor does, clicking in the same area sorts the same effect so i thought that it was just an error.

Also, a question: do you have plans on an alternative version, or is there any way we can change the modules colours by ourselves? I love the overall look but I would like to make the grey more neutral (instead of the current cold grey, because I find warmer colours easier on the eye) and give more diversity to module colours instead of different shades of blue/violet. I understand that maybe the original design was made to make the modulation rings pop out more and give more contrast, but I think that dark pastel colours shouldn't be an issue, especially given the advantage it would provide to identify modules at first glance.
It could also be a good idea to change the wavefolder display to show the interested segment in a different colour instead of white on grey.
Something like this (sorry for the shitty photoshop, it's just to give an idea)
Image

tapekiller
KVRist
79 posts since 6 Nov, 2014

Re: "Neumann" GUI for Zebra²/Zebralette

Post Thu Dec 05, 2019 5:00 am

Oh, I almost forgot. The Matrix and XY pads look different from the images on the website, I really liked the look of it (yellow text on dark background is good) and the background gradients look a bit weird (I would understand if the elements were very far away, but imo the gradient background is just visual noise right now). Also, the x and y parameters were yellow on black, but they are white on black now... Any way to change them back to the original look by ourselves (from what I understand, it should be possible through zebra2.txt in scripts folder)? I really loved the original look

Return to “u-he”