Once again - brings down, where, depending on the local VAT (up to 27 % in Europe). Don’t give too positive picture of the reality.Kalamata Kid wrote: Wed May 13, 2020 9:02 am^^^Ceej wrote: Wed May 13, 2020 6:30 amThe voucher code MTFBWY25 is still working and can be stacked with the above voucher, bringing it down to $24.99 in cart.toneframer wrote: Wed May 13, 2020 5:55 am Plugin Alliance doing a 48h flash sale for Unfiltered Audio LION![]()
Use the coupon code LION-4999 to get it for just $49.99
Offer ends May 13, 11:59 PM California Time
https://www.plugin-alliance.com/en/prod ... _lion.html
Thanks, it worked!
Bought mostly on the way it sounds and the BYOME randomizer.
and the MPE.
Bargain Center: discussion, gossip, etc.
- KVRAF
- 5440 posts since 4 Aug, 2006 from Helsinki
- KVRian
- 1094 posts since 13 Mar, 2008 from Arnhem, Netherlands
Anyone have some suggestions for gems from Sample Magic?LoveEnigma18 wrote: Tue May 12, 2020 2:44 amThat's a big news and sale, though not that surprising about Splice amalgamation. Been a big fan of Sample Magic stuff. One of the best sample makers. Thanks for posting!ere2learn wrote: Mon May 11, 2020 7:13 pm Sample Magic - 70% off everything
https://www.samplemagic.com/
We're closing down our website soon, as we are now amalgamating further into the Splice
family.
To thank you all we've got 70% off everything on our site until the end of May! Don't miss out.![]()
So much stuff...
- KVRAF
- 6295 posts since 12 Jan, 2018
It's indeed confusing to choose, especially because almost everything sounds good in audio demos. Depends on your genre, but their Electronica and Chillout packs are something I personally love and are better suitable for my music compared to others.evilantal wrote: Wed May 13, 2020 9:39 amAnyone have some suggestions for gems from Sample Magic?LoveEnigma18 wrote: Tue May 12, 2020 2:44 amThat's a big news and sale, though not that surprising about Splice amalgamation. Been a big fan of Sample Magic stuff. One of the best sample makers. Thanks for posting!ere2learn wrote: Mon May 11, 2020 7:13 pm Sample Magic - 70% off everything
https://www.samplemagic.com/
We're closing down our website soon, as we are now amalgamating further into the Splice
family.
To thank you all we've got 70% off everything on our site until the end of May! Don't miss out.![]()
So much stuff...
I would highly recommend using filters on their website to narrow down the selection as much as possible. Perhaps just stick to one or two genres.
- KVRAF
- 7903 posts since 24 May, 2009 from Nationalism isn't my thing...
Maybe not with VAT, but without VAT this combination does bring it down to #24.99.Harry_HH wrote: Wed May 13, 2020 9:12 amOnce again - brings down, where, depending on the local VAT (up to 27 % in Europe). Don’t give too positive picture of the reality.Kalamata Kid wrote: Wed May 13, 2020 9:02 am^^^Ceej wrote: Wed May 13, 2020 6:30 amThe voucher code MTFBWY25 is still working and can be stacked with the above voucher, bringing it down to $24.99 in cart.toneframer wrote: Wed May 13, 2020 5:55 am Plugin Alliance doing a 48h flash sale for Unfiltered Audio LION![]()
Use the coupon code LION-4999 to get it for just $49.99
Offer ends May 13, 11:59 PM California Time
https://www.plugin-alliance.com/en/prod ... _lion.html
Thanks, it worked!
Bought mostly on the way it sounds and the BYOME randomizer.
and the MPE.
Thank you to Ceej and Kalamata Kid for posting. I've been looking at Lion for a while now and this was too good to pass up.
Blue Phase Music
- KVRAF
- 1574 posts since 21 Nov, 2018
If you like Techno the 2 Soma Records packs are nice, I bought those along with warehouse rave & pounding technoevilantal wrote: Wed May 13, 2020 9:39 am Anyone have some suggestions for gems from Sample Magic?
So much stuff...
- KVRAF
- 3361 posts since 31 Dec, 2004 from People's Republic of Minnesota
Man, I can’t wait to buy PPG Infinite Pro for $25 in a year! 
-
Kurdish Mayfield Kurdish Mayfield https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=252165
- KVRist
- 416 posts since 9 Mar, 2011
Just got this also. These days ,all I'm looking to get is soundmakers not fx so this is right in my ballpark. I have Serum , GO2, Massive X and Omnisphere plus Komplete so I would have normally investigated in depth but $25 is a "jump first" price for me. Thanks for postingBlue Phase Music wrote: Wed May 13, 2020 1:07 pmMaybe not with VAT, but without VAT this combination does bring it down to #24.99.Harry_HH wrote: Wed May 13, 2020 9:12 amOnce again - brings down, where, depending on the local VAT (up to 27 % in Europe). Don’t give too positive picture of the reality.Kalamata Kid wrote: Wed May 13, 2020 9:02 am^^^Ceej wrote: Wed May 13, 2020 6:30 amThe voucher code MTFBWY25 is still working and can be stacked with the above voucher, bringing it down to $24.99 in cart.toneframer wrote: Wed May 13, 2020 5:55 am Plugin Alliance doing a 48h flash sale for Unfiltered Audio LION![]()
Use the coupon code LION-4999 to get it for just $49.99
Offer ends May 13, 11:59 PM California Time
https://www.plugin-alliance.com/en/prod ... _lion.html
Thanks, it worked!
Bought mostly on the way it sounds and the BYOME randomizer.
and the MPE.
Thank you to Ceej and Kalamata Kid for posting. I've been looking at Lion for a while now and this was too good to pass up.
-
- KVRian
- 750 posts since 3 May, 2018
Chainer doesn't pickup Reason Rack, added all the necessary directories, doesn't work.
Also for reference, I loaded up 3 synths in Chainer, got artifacts. Same 3 in cubase played at the same time, perfect.
I'm not bothered its only $20, however I'll be sticking to templates and removing Chainer. Mainly, I just want to inform the community my of my 10 minute test result.
Also for reference, I loaded up 3 synths in Chainer, got artifacts. Same 3 in cubase played at the same time, perfect.
I'm not bothered its only $20, however I'll be sticking to templates and removing Chainer. Mainly, I just want to inform the community my of my 10 minute test result.
Have you tried Vital?
-
- KVRian
- 1068 posts since 24 Jan, 2014
Thanks for the info, what a disappointment. I dont have Reason but I did test it extensively in Cubase and it has always worked. But I never tried chaining synths in a row, always 1 or two max. So, not a perfect program for Synth chaining perhaps but for guitar playing it has been excellent - Ive had 2 amp going in, then chorus, 3 reverbs and 2 delays in my chain without any problems.Psuper wrote: Wed May 13, 2020 8:11 pm Chainer doesn't pickup Reason Rack, added all the necessary directories, doesn't work.
Also for reference, I loaded up 3 synths in Chainer, got artifacts. Same 3 in cubase played at the same time, perfect.
I'm not bothered its only $20, however I'll be sticking to templates and removing Chainer. Mainly, I just want to inform the community my of my 10 minute test result.
-
- KVRAF
- 4720 posts since 26 Nov, 2015 from Way Downunder
I heard P&M Chainer also doesn't compensate for latency - is that true? That's a showstopper. Bye bye delay sync. I will pass on this ancient abandonware.
But there is clearly a gap in the market for this kind of thing in an affordable package.
But there is clearly a gap in the market for this kind of thing in an affordable package.
-
- KVRian
- 1356 posts since 21 Sep, 2013 from California
I don't know how Unify compares to this. You can load both midi and vst effects and instruments in a chain then save as a preset. https://www.pluginguru.com/products/unify-standard/MogwaiBoy wrote: Wed May 13, 2020 9:36 pm I heard P&M Chainer also doesn't compensate for latency - is that true? That's a showstopper. Bye bye delay sync. I will pass on this ancient abandonware.
But there is clearly a gap in the market for this kind of thing in an affordable package.
Only problem for me is it doesn't support AAX, so won't work in my ProTools. I've also had some crashing with it. I found when I loaded Kontakt first, I would crash in the standalone version. But if I load a midi effect first, Kontakt was fine. But that could be me.
- KVRist
- 314 posts since 8 Oct, 2004 from Newberg, Oregon 97132
I just bought Chainer and it works perfectly in my DAW, Studio One. I have both Plug & Mix plugins and my third party VST plugins in a chain, and it works great.Psuper wrote: Wed May 13, 2020 8:11 pm Chainer doesn't pickup Reason Rack, added all the necessary directories, doesn't work.
Also for reference, I loaded up 3 synths in Chainer, got artifacts. Same 3 in cubase played at the same time, perfect.
I'm not bothered its only $20, however I'll be sticking to templates and removing Chainer. Mainly, I just want to inform the community my of my 10 minute test result.
I wish I had known about this long ago. Chainer is really a nice plugin. Also, their VIP Bundle sounds really nice. I've listened to several of their plugins, and they sound clean and work as expected. I really like em...
If you keep your eyes on their sales, they usually have great promotions. I just missed their VIP Bundle promotion, which went for $49.99. It ended last April 28th, 2020.
I saw this on their Facebook page... Check their FB page here... or their recently expired promo Here...
These really are nice plugins.
Coronal Winds Radio - Tune In!
Remember, what you believe doesn't rewrite reality.
Remember, what you believe doesn't rewrite reality.
-
- KVRian
- 653 posts since 12 Mar, 2002 from Rocklin, CA
There's a couple options in the $79-$99 range, including Unify, Blue Cat Patchwork, etc.dzilizzi wrote: Wed May 13, 2020 9:43 pmI don't know how Unify compares to this. You can load both midi and vst effects and instruments in a chain then save as a preset. https://www.pluginguru.com/products/unify-standard/MogwaiBoy wrote: Wed May 13, 2020 9:36 pm But there is clearly a gap in the market for this kind of thing in an affordable package.
In the slightly cheaper range there's DDMF Metaplugin for $50, which looks pretty neat.
There's actually a ton of options, many free, with varying levels of quality and supportedness - https://www.kvraudio.com/plugins/plug-i ... ack/start0
Ceej
aka Chris Hillery
aka Chris Hillery
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193
- KVRAF
- 13256 posts since 30 Apr, 2019
Main difference I can see is you won't be able to establish an effects chain as IIRC currently Unify only surfaces as a VSTi (instrument) and not effect so you wouldn't be able to pass through the sound from another instrument or audio sample. They are constantly working on Unify though - I know they're wanting to add in things like allowing it to surface as a MIDI effect so maybe audio effect is going to be doable.dzilizzi wrote: Wed May 13, 2020 9:43 pmI don't know how Unify compares to this. You can load both midi and vst effects and instruments in a chain then save as a preset. https://www.pluginguru.com/products/unify-standard/MogwaiBoy wrote: Wed May 13, 2020 9:36 pm I heard P&M Chainer also doesn't compensate for latency - is that true? That's a showstopper. Bye bye delay sync. I will pass on this ancient abandonware.
But there is clearly a gap in the market for this kind of thing in an affordable package.
Only problem for me is it doesn't support AAX, so won't work in my ProTools. I've also had some crashing with it. I found when I loaded Kontakt first, I would crash in the standalone version. But if I load a midi effect first, Kontakt was fine. But that could be me.![]()
I guess Blue Cat PatchWork is the closest to what Chainer can do, but it's not overly intuitive and I find it a bit glitchy to use, sometimes patches within PatchWork go missing, crashes aren't infrequent so I haven't used it for a long while. Especially now when most DAWs can handle VST3 whereas when I bought PatchWork a few DAWs would only react to VST2.
-
- KVRian
- 750 posts since 3 May, 2018
I didn't say it didn't work - I said it doesn't see Reason Rack. Does your chainer see Reason Rack?dlt123 wrote: Wed May 13, 2020 10:34 pmI just bought Chainer and it works perfectly in my DAW, Studio One. I have both Plug & Mix plugins and my third party VST plugins in a chain, and it works great.Psuper wrote: Wed May 13, 2020 8:11 pm Chainer doesn't pickup Reason Rack, added all the necessary directories, doesn't work.
Also for reference, I loaded up 3 synths in Chainer, got artifacts. Same 3 in cubase played at the same time, perfect.
I'm not bothered its only $20, however I'll be sticking to templates and removing Chainer. Mainly, I just want to inform the community my of my 10 minute test result.
I wish I had known about this long ago. Chainer is really a nice plugin. Also, their VIP Bundle sounds really nice. I've listened to several of their plugins, and they sound clean and work as expected. I really like em...
If you keep your eyes on their sales, they usually have great promotions. I just missed their VIP Bundle promotion, which went for $49.99. It ended last April 28th, 2020.
I saw this on their Facebook page... Check their FB page here... or their recently expired promo Here...
These really are nice plugins.
I also mentioned the glaring inherent issues with multiple VSTs running inside chainer verses running native DAW. And a very big problem that is when we're only talking 3 VST patches, I didn't need to test further.
Grains of salt for praise should be taken.
Have you tried Vital?
Partner Links
When you buy from our partners through links on kvraudio.com KVR may earn an affiliate commission. This helps to support KVR. Thanks!