This may be more about my own inexperience and lack of knowledge regarding all things modular...
I'm trying to use the Hetrick Flip-Flop module to turn a sequencer on and off. I run a cable from the trigger input on the main panel to the "T In" port on Flip-Flop. I wire the "FFT" port to the "start" port on, say, the 8-step sequencer. I wire the "!FFT" port to the "stop" port of the 8-step sequencer. When I press a key on my keyboard the sequencer starts as expected. The next key press stops it. The next key press the sequencer may start but more often than not it begins rapidly oscillating between on and off. If I hook the "FFT" and "!FFT" outputs of the Flip-Flop to the Macauley voltage meter I get similar behavior. A new instance of the Flip-Flop will show +5v at the "FFT" port and 0v at the "!FFT" port upon first keyboard press - press a key and the "FFT" port shows 0v and "!FFT" shows +5v. After that the voltages seem to come on and off seemingly randomly. The LEDs on the Flip-Flop do show the correct state (correct meaning they consistently alternate being on/off).
So what am I misunderstanding?
Mike
Questions regarding Hetrick Flip-Flop
Official support for: cherryaudio.com
Moderators: KVR Moderators (Main), Cherry Audio Moderators
Questions regarding Hetrick Flip-Flop
2020-07-01T01:09:48+00:00
This may be more about my own inexperience and lack of knowledge regarding all things modular...
I'm trying to use the Hetrick Flip-Flop module to turn a sequencer on and off. I run a cable from the trigger input on the main panel to the "T In" port on Flip-Flop. I wire the "FFT" port to the "start" port on, say, the 8-step sequencer. I wire the "!FFT" port to the "stop" port of the 8-step sequencer. When I press a key on my keyboard the sequencer starts as expected. The next key press stops it. The next key press the sequencer may start but more often than not it begins rapidly oscillating between on and off. If I hook the "FFT" and "!FFT" outputs of the Flip-Flop to the Macauley voltage meter I get similar behavior. A new instance of the Flip-Flop will show +5v at the "FFT" port and 0v at the "!FFT" port upon first keyboard press - press a key and the "FFT" port shows 0v and "!FFT" shows +5v. After that the voltages seem to come on and off seemingly randomly. The LEDs on the Flip-Flop do show the correct state (correct meaning they consistently alternate being on/off).
So what am I misunderstanding?
Mike
SleepIsWrong
https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=416029
-
- KVRist
- Topic Starter
- 30 posts since 22 Mar, 2018 from Baltimore, MD
- Contact:
Post by SleepIsWrong » Wed Jul 01, 2020 1:09 am
Post Reply
1 post
• Page 1 of 1
Jump to
- The Main Forums
- ↳ KVR Studio Manager
- ↳ KVR Experts
- ↳ Getting Started (AKA What is the best...?)
- ↳ Instruments
- ↳ Effects
- ↳ Hosts & Applications (Sequencers, DAWs, Audio Editors, etc.)
- ↳ Guitars
- ↳ Mobile Apps and Hardware
- ↳ Soundware
- ↳ Samplers, Sampling & Sample Libraries
- ↳ Hardware (Instruments and Effects)
- ↳ Modular Synthesis
- ↳ Sound Design
- ↳ Production Techniques
- ↳ Music Theory
- ↳ Computer Setup and System Configuration
- ↳ DSP and Plugin Development
- ↳ DIY: Build it and they will come
- ↳ Music Cafe
- ↳ Sell & Buy (+Special Offers, Deals & Promos)
- ↳ KVR Developer Challenge 2023
- ↳ Everything Else (Music related)
- ↳ Off Topic
- ↳ Off Topic Classics
- Official Company Forums
- ↳ 2getheraudio
- ↳ accSone
- ↳ Acon Digital
- ↳ AcousticsampleS
- ↳ AcousModules
- ↳ Agitated State
- ↳ AIR Music Technology
- ↳ AMG
- ↳ Ample Sound
- ↳ Antares Audio Technologies
- ↳ Apisonic Labs
- ↳ apulSoft
- ↳ AriesCode
- ↳ Arts Acoustic
- ↳ Arturia
- ↳ Audjoo
- ↳ AudioSpillage
- ↳ Audiority
- ↳ Best Service
- ↳ Big Tick
- ↳ Bitwig
- ↳ Controller Scripting
- ↳ Blue Cat Audio
- ↳ Cherry Audio
- ↳ CWITEC
- ↳ Embertone
- ↳ energyXT
- ↳ Eventide
- ↳ Expert Sleepers
- ↳ forward audio
- ↳ Future Audio Workshop
- ↳ FXpansion
- ↳ g200kg
- ↳ Harrison Mixbus
- ↳ HG Fortune
- ↳ Homegrown Sounds
- ↳ HoRNet Plugins
- ↳ Ilya Efimov Production
- ↳ Image Line
- ↳ Impact Soundworks
- ↳ Indiginus
- ↳ Insert Piz Here
- ↳ Ju-X
- ↳ Kirk Hunter Studios
- ↳ Kirnu
- ↳ Kong Audio
- ↳ Krotos
- ↳ Kuassa
- ↳ KV331 Audio
- ↳ LennarDigital
- ↳ Les Productions Zvon
- ↳ Liqube Audio
- ↳ Loomer
- ↳ LVC-Audio
- ↳ Maizesoft
- ↳ Manytone Music
- ↳ MeldaProduction
- ↳ Mellowmuse
- ↳ MIDIMood
- ↳ moForte
- ↳ Mozaic Beats
- ↳ mucoder
- ↳ MusicDevelopments
- ↳ Tips & Tricks
- ↳ MusicLab
- ↳ MUTOOLS
- ↳ New Sonic Arts
- ↳ NUSofting
- ↳ Oli Larkin Plugins
- ↳ Orange Tree Samples
- ↳ patchpool
- ↳ Photosounder
- ↳ PlugInGuru
- ↳ Polyverse Music
- ↳ Precisionsound
- ↳ Premier Sound Factory
- ↳ Psychic Modulation
- ↳ Realitone
- ↳ Resonance-Sound
- ↳ Reveal Sound
- ↳ Roger Linn Design
- ↳ rs-met
- ↳ S3A: Spatial Audio
- ↳ SaschArt
- ↳ Smart Electronix
- ↳ sonible
- ↳ SonicBirth
- ↳ Sonic Reality / eSoundz.com
- ↳ Soundiron
- ↳ SPC Plugins
- ↳ Sugar Bytes
- ↳ TAL Software
- ↳ Tokyo Dawn Labs
- ↳ Tracktion
- ↳ u-he
- ↳ u-he Linux support
- ↳ United Plugins
- ↳ VAZ Synths
- ↳ Virharmonic
- ↳ Wolfgang Palm
- ↳ xoxos
- ↳ XSRDO - SynthCraft
- ↳ ZynAddSubFX
- Site Stuff
- ↳ Site Stuff
- Archived Forums
- ↳ AlgoMusic
- ↳ easytoolz
- ↳ Elevayta
- ↳ Hollow Sun
- ↳ Kazrog
- ↳ LinPlug
- ↳ Muse Research and Development
- ↳ Shuriken
- ↳ SoHa Sound Design
- ↳ Soniccouture
- ↳ Topten Software
- ↳ Tweakbench
- ↳ Valhalla DSP
- ↳ CK Modules & VST
- ↳ Sennheiser AMBEO
- ↳ Muon Software
- ↳ Westgatesounds.net
- ↳ Squaredheads
- ↳ Sonigen
- ↳ CFA-Sound
- ↳ Back In Time Records
- ↳ Livelab.dk
- ↳ Skytopia
- ↳ audioD3CK
- ↳ Inspire Audio
- ↳ Krakli
- ↳ Drumdrops
- ↳ Futucraft
- ↳ OverTone DSP
- ↳ RaXnTraX
- ↳ solar3d-software
- ↳ Signaldust
- ↳ Soundemote
- KVR Forum index
- All times are UTC
- Delete cookies