Presswerk Nitro skin now on patchlib

[Tagirijus]

Wow, lovely skin. Thank your so much for sharing. Looks / feels like another tool almost! (=

[dayjob]

reup 3.11
https://we.tl/t-jQKFXviwzs

wicked. thank you for sharing this!

[Ploki]

thank you very much

if you find anything quirky/weird about it please let me know, i'll hold off another week before posting to patch lib

[Tagirijus]

I did some minor changes for myself; just in case it could be an inspiration for you; but probably not since your skin looks cleaner, but I just like to have some more indicators for the RMS and Adapt knobs, hehe:

2021-12-01_09-59-34.png

(I modified the MainComp.png file accordingly.)


Also: some detection delay knobs did not have valuestring='msec', but "generic", which seems to make the shown value on the top not in msec. But more important, and I am not sure how to change it: when moving this knob, it only moves in 10 steps. Probably due to the -5 to +5 range. Is there any way to change this? I could not find any kind of docs for the skin language of u-he, unfortunately.

And another question, while I am not sure, if anybody here in this thread is evewn capable of answering that: I found out that when holding shift before dragging a knob, you can move it way more accurate: 1. Is there any way to make this behaviour happen also while already dragging, but holding shift then? 2. Is there any way to adjust the speed of the changed knob-turn-behaviour somwhere?

[Ploki]

These small markers look cool! Which values did you make them for?

Detection delay is problematic because it's assigned to a slider not a knob and with this particular value slider behaves very weird.
The top value is shown in msec (-5 to +5 msec) but without units. if i recall correctly this was the only way i could make it not behave erratically - when i first made it into a slider it just jumped around, but now the only way to fine tune it is shift + mousewheel.

i was trying to solve that with u-he support a while ago but we didn't find a solution. I'll try contacting tbh, that bugs me too and i don't want to make it into a knob.

[Tagirijus]

These small markers look cool! Which values did you make them for?

Only the ones you can see on my screenshot, hehe. The RMS positions at 1ms, 3ms and 10ms and for the Adapt-knob the positions 25% and 75%.

I did no other knobs so far. Also it's just a very rough amateurish line with text badly placed on top of your PNG, haha.

The top value is shown in msec (-5 to +5 msec) but without units.

Well at least the unit can be shown there, if you replace all

Code: Select all

parameter='dly1' valuestring='generic'

with

Code: Select all

parameter='dly1' valuestring='msec'

and same for 'dly2'. I did it manually; I guess there were only one or two in the Presswerk.txt file. Then you can have the values "ms" shown in the top:

if i recall correctly this was the only way i could make it not behave erratically - when i first made it into a slider it just jumped around, but now the only way to fine tune it is shift + mousewheel.

i was trying to solve that with u-he support a while ago but we didn't find a solution. I'll try contacting tbh, that bugs me too and i don't want to make it into a knob.

I see. Thanks for all your effort! I looked through the whole TXT and also the original TXT, but I could not find any kind of name='...' for the PROPERTY control to maybe change this behaviour, hehe. It's no biggy to me. I just wanted to point that out!

[Ploki]

it looks like it behaves normally tho (well at least the same as "generic"), it doesn't jump around like it used to, i'll switch it up thanks for the legwork. I did contact support if they could take a look at it

edit: as far as going into fine-tune mode AFTER you grab the knob i don't think you can, i was looking for that when i bought the nObcontrol controller so i wouldn't have to remember to hit a keyswitch before grabbing it (it's just more intuitive that way) but i made a hotkey to switch nobcontrol into "fine tune" mode.

[Ploki]

I see. Thanks for all your effort! I looked through the whole TXT and also the original TXT, but I could not find any kind of name='...' for the PROPERTY control to maybe change this behaviour, hehe. It's no biggy to me. I just wanted to point that out!

so the report was super speedy and i got an answer like an hour after i first replied - basically they don't use horizontal faders a lot (at all?) so it never came up and it's something in the UI Framework - on buglist to be fixed someday

[PepeLopez]

Can't find any working dl link

[Tagirijus]

For maybe not the most recent versions, feel free to check this out: https://u-he.com/PatchLib/skins.html

[Ploki]

Can't find any working dl link

yeah i need to write to u-he to upload it to the new patchlib i’ll reup the most recent render today

For maybe not the most recent versions, feel free to check this out: https://u-he.com/PatchLib/skins.html

Oof the nitro there is horrible extremely tacky

[PepeLopez]

yeah i need to write to u-he to upload it to the new patchlib i’ll reup the most recent render today

That'll take too much time - please share a link with me

[Ploki]

yeah i need to write to u-he to upload it to the new patchlib i’ll reup the most recent render today

That'll take too much time - please share a link with me

https://we.tl/t-v5xsvpaNPA

[PepeLopez]

Thank you!!

[Ploki]

Now on patch lib, download link:

https://u-he.com/PatchLib/skins/Ploki-p ... _nitro.zip

Older nitro is no longer available