I just dropped the start of a project I call Deployment Series Homage Line, which is me redoing many of the old SynthEdit projects and bringing them to VST3 and 4K active resampling.
It’s just a 2 operator FM Synth for now.
The DSP end is free, to use the GUI, a click back to my web site is required.
https://www.kvraudio.com/product/jwp-de ... ine-by-jwp
JWP Deployment Series Homage Line
-
- KVRist
- 43 posts since 11 Apr, 2016
-
- KVRAF
- 1924 posts since 24 Apr, 2010
Not the most inviting of openings, but intriguing enough for me to explore.
And while I am not offering to think up a new name, 'Deployment Series Homage Line' is a bit of a mouthful.
Nine or ten clicks before you actually get to download the .exe file, hopefully you can refine that.
Nevertheless, I like the (discontinued) Drum Module, though I've yet to try the Sweet Spots effect.
Thanks Justin.
And while I am not offering to think up a new name, 'Deployment Series Homage Line' is a bit of a mouthful.
Nine or ten clicks before you actually get to download the .exe file, hopefully you can refine that.
Nevertheless, I like the (discontinued) Drum Module, though I've yet to try the Sweet Spots effect.
Thanks Justin.
Last edited by bob bobwood on Thu Jun 13, 2024 4:34 pm, edited 2 times in total.
-
- KVRAF
- 1924 posts since 24 Apr, 2010
oh bugger
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Hi bob,
Thanks for the feedback.
This specific product is Homage Line, I'll rip out the prefix going forward and just include a mention that it's part of the Deployment Line.
I'll change the product link to land right at the description page.
The "oh bugger" I imagine is becuase you opened it up!
It's a "freemium" type product, the DSP (processing) end is competely unrestricted.
Doing the "808 drum" today, however, I might switch the names between the "Drum Module", becuase the "808" has too much sweep sound. Mostly the same between the two, just the bass drum is different; not sure about the snare.
These are very "primitive" systems as I'm doing my best to keep them as original as possible. Once the line is complete, I do want to make them a bit more functonal. Like ms ADSR read outs instead of volts, and multiple sends for the drums.
The idea is to have sort of a SynthEdit "stock" plug-in line.
Thanks again.
Thanks for the feedback.
This specific product is Homage Line, I'll rip out the prefix going forward and just include a mention that it's part of the Deployment Line.
I'll change the product link to land right at the description page.
The "oh bugger" I imagine is becuase you opened it up!
It's a "freemium" type product, the DSP (processing) end is competely unrestricted.
Doing the "808 drum" today, however, I might switch the names between the "Drum Module", becuase the "808" has too much sweep sound. Mostly the same between the two, just the bass drum is different; not sure about the snare.
These are very "primitive" systems as I'm doing my best to keep them as original as possible. Once the line is complete, I do want to make them a bit more functonal. Like ms ADSR read outs instead of volts, and multiple sends for the drums.
The idea is to have sort of a SynthEdit "stock" plug-in line.
Thanks again.
-
- KVRAF
- 1924 posts since 24 Apr, 2010
Apologies, the 'oh bugger' comment resulted from an attempt to edit my first comment but ended up quoting the stuff I was trying to edit. Then I lost my internet signal and never got back online until a short while ago, after moving my boat to a slightly different location.
Synthedit classic/basic look but in vst3 wasn't something I'd ever imagined. Looking forward to checking in more depth.
Synthedit classic/basic look but in vst3 wasn't something I'd ever imagined. Looking forward to checking in more depth.
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
It's also ultra high definition UHD/4K, the rasters actively "resample" depending on windows scaling factor.
I got the original assets from the SynthEdit developer and rerendered them in Povray at 1x2x4 resolution.
I got the original assets from the SynthEdit developer and rerendered them in Povray at 1x2x4 resolution.
-
- KVRAF
- 9844 posts since 15 Sep, 2005 from East Coast of the USA
I just read you got the assets from the developer, but for the FM synth it is spelled Oscillator. 
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
I totally remember spell checking that! I must have built over it during a revision!
So many small things I had to consider for such a simple synth! Just building the installer was a task in itself, then pressing, and now consumer feedback. Developers in big companies are so lucky to have dedicated departments and just focus on the product!
Thanks for catching that one!
Full disclosure, some of the assets were missing. I had to do the background myself in Blender 3D. I didn't know what it was so I asked the developer, and he said the intended idea was that rough plastic from the back of a Pro-One.
You do not have the required permissions to view the files attached to this post.
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Added 2 drum plug-ins to the installer.
Still waiting for the press release to be cleared, I'll remove this portion when is does:
JWP has released 1.0.1 updates for JWP Deployment Series Homage Line to Include 2 new drum plug-ins into the line:
Based on the original preset from SynthEdit 1.1.
Uses original filters for sound design.
General MIDI trigger mapping.
Synthetic sounds include kick drum, snare drum, high-hats, cow bell, rim shot, clap, crash, ride, low tom, mid tom, high tom, high conga, low conga, tambourine, and clave.
808 Drum:
Sweeping sine wave type kick drum.
Sine wave over white noise snare drum.
Drum Module:
Secondary sweeping oscillator for adding high end to the kick drum.
Dual oscillator for more tone, along with white noise in the snare drum.
Still waiting for the press release to be cleared, I'll remove this portion when is does:
JWP has released 1.0.1 updates for JWP Deployment Series Homage Line to Include 2 new drum plug-ins into the line:
Based on the original preset from SynthEdit 1.1.
Uses original filters for sound design.
General MIDI trigger mapping.
Synthetic sounds include kick drum, snare drum, high-hats, cow bell, rim shot, clap, crash, ride, low tom, mid tom, high tom, high conga, low conga, tambourine, and clave.
808 Drum:
Sweeping sine wave type kick drum.
Sine wave over white noise snare drum.
Drum Module:
Secondary sweeping oscillator for adding high end to the kick drum.
Dual oscillator for more tone, along with white noise in the snare drum.
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Here is the press release:
https://www.kvraudio.com/news/jwp-updat ... dows-61355
https://www.kvraudio.com/news/jwp-updat ... dows-61355
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
The JWP Deployment Series Homage Line now includes the classic PD-303. Here is the press release here at KVR:
https://www.kvraudio.com/news/jwp-updat ... -303-61411
Looks great with the 4K compatible skin and this is only 125% using 1920x1080. Also, here the marketing video that contains some of the presets:
https://www.kvraudio.com/news/jwp-updat ... -303-61411
Looks great with the 4K compatible skin and this is only 125% using 1920x1080. Also, here the marketing video that contains some of the presets:
You do not have the required permissions to view the files attached to this post.
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Did a video for the first entry, the FM Synthesizer.
You do not have the required permissions to view the files attached to this post.
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
More catch up with promo videos for the remaining plug-ins:
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Update release, I feel it's better to post the news release as full form here than just posting a link:
"
JWP has released a 1.0.3 update for JWP Deployment Series Homage Line which now includes a reasmpler on the PD-303, and a performance bar on the FM Synthesizer, and PD-303.
https://sites.google.com/site/jwpsite/a ... omage-line
Features:
PD-303 Resampler: Previously missing.
Performance Bar: Allows for quick switching of options like mono-mode, portamento speed, ect. in place of the menu.
Refinements:
Fixed issues with presets and registration.
Added a "Close" button for the popup.
Changed "Buy Now" to "Register".
Added "legacy-vertical-offset 0" fix to attempt to fix scaled text.
Changed wording and "Visit" link to JWP Site home page.
Changed PD303 parameters names from "MOD:" to "EFF: DEL:".
Added editable parameters "PRE:" preset and bank descriptions.
Turned on ignore program change for privated preset category.
Add a post web site load to installer.
Updated presets to fix issue with registration.
Add presets' install location to installer.
"
"
JWP has released a 1.0.3 update for JWP Deployment Series Homage Line which now includes a reasmpler on the PD-303, and a performance bar on the FM Synthesizer, and PD-303.
https://sites.google.com/site/jwpsite/a ... omage-line
Features:
PD-303 Resampler: Previously missing.
Performance Bar: Allows for quick switching of options like mono-mode, portamento speed, ect. in place of the menu.
Refinements:
Fixed issues with presets and registration.
Added a "Close" button for the popup.
Changed "Buy Now" to "Register".
Added "legacy-vertical-offset 0" fix to attempt to fix scaled text.
Changed wording and "Visit" link to JWP Site home page.
Changed PD303 parameters names from "MOD:" to "EFF: DEL:".
Added editable parameters "PRE:" preset and bank descriptions.
Turned on ignore program change for privated preset category.
Add a post web site load to installer.
Updated presets to fix issue with registration.
Add presets' install location to installer.
"
-
- KVRist
- Topic Starter
- 43 posts since 11 Apr, 2016
Another update, this one comes with keyboard programmability for read outs which was greatly needed. I've also ported contextual based read outs, sensitivity control and amount snapping from Sweet Spots to really bring some sophistication to these legacy tools. Took awhile to back port.
Some "new" plug-ins being Poly Synth 1 and 2. I wondered why the prefab was called 2 and had to trace back to SynthEdit (SE) 0.9462 to find version 1, which only had 1 LFO, a modulation source/destination routing, oscillator sync, PWM control for both oscillators, and keyboard tracking control being the main differences. Poly Synth 1 also had many presets.
I made an full update list here:
https://sites.google.com/site/jwpsite/a ... es-updates
Pictures and videos:
Some "new" plug-ins being Poly Synth 1 and 2. I wondered why the prefab was called 2 and had to trace back to SynthEdit (SE) 0.9462 to find version 1, which only had 1 LFO, a modulation source/destination routing, oscillator sync, PWM control for both oscillators, and keyboard tracking control being the main differences. Poly Synth 1 also had many presets.
I made an full update list here:
https://sites.google.com/site/jwpsite/a ... es-updates
Pictures and videos:
You do not have the required permissions to view the files attached to this post.