SynthMaster 3 Official Thread: SynthMaster 3/Player v3.4.9 Rev 17271 update

[swilow11]

One thing re: the vector oscillator. I was actually trying to load single cycle waveforms, not a scannable wavetable. The single cycle was in wav format. Can these be loaded into the vector?

Yes you can. But I discovered 2 issues. will release a hotfix for that tonight. Please wait for my announcement

Awesome Thanks mate!

[fisherKing]

scrolling thru presets; sometimes one preset sounds while selecting the next several.

will check this out more carefully this week (and will do a reboot first), and i'll report back. maybe just a glitch moment

If you are scrolling fast, and the presets are loading resources that take time to load (wavetables or samples), this could happen. this is normal behaviour.

seems to (so far) only happen between the arps in this photo (i can make a little video if needed); scrolling thru them plays the same sound, but changes outside of the red box to the correct sound.

wondering if anyone else sees this?

SM3.jpg

[PietW.]

Hello, I have a lot of wavetables. I imported them into Synthmaster 2 yesterday and it worked without any problems. Since then, Synthmaster 3 won't start. In the task manager there is a task with Synthmaster 2.9. If I delete this I can start Synthmaster one and Synthmaster2. Synthmaster 3 crashes before the GUI opens. Does Synthmaster 3 access the same wavetables folder?

[kv331]

seems to (so far) only happen between the arps in this photo (i can make a little video if needed); scrolling thru them plays the same sound, but changes outside of the red box to the correct sound.

I tested with those presets, but still no luck.

Does this only happen with SM1 / SM2 presets ? Did you download those presets with SM3 or with SM1 / SM2 before? Maybe a version issue or something.

How about if we try this:

Delete c:/users/public/public documents/synthmaster/presets folder contents
Delete c:/users/public/public documents/synthmasterone/presets folder contents
Restore expansions inside SM3.

Are you still having the same problem?

[kv331]

Hello, I have a lot of wavetables. I imported them into Synthmaster 2 yesterday and it worked without any problems. Since then, Synthmaster 3 won't start. In the task manager there is a task with Synthmaster 2.9. If I delete this I can start Synthmaster one and Synthmaster2. Synthmaster 3 crashes before the GUI opens. Does Synthmaster 3 access the same wavetables folder?

Yes it does. Is there a chance to send me those wavetables? Probably a wav header like metadata text is causing this issue.

[Vocalpoint Studios]

Yes you can. But I discovered 2 issues. will release a hotfix for that tonight. Please wait for my announcement

Hopefully this hotfix puts the standalone setup back on track as well?

VP

[robert_p]

seems to (so far) only happen between the arps in this photo (i can make a little video if needed); scrolling thru them plays the same sound, but changes outside of the red box to the correct sound.

wondering if anyone else sees this?

These presets don't have an audio previews (no "play" icon on the right - no audition when srolling) but should load normally.

[kv331]

These presets don't have an audio previews (no "play" icon on the right - no audition when srolling) but should load normally.

Audio previews are irrelevent to the issue he's observing though.

[fisherKing]

seems to (so far) only happen between the arps in this photo (i can make a little video if needed); scrolling thru them plays the same sound, but changes outside of the red box to the correct sound.

I tested with those presets, but still no luck.

Does this only happen with SM1 / SM2 presets ? Did you download those presets with SM3 or with SM1 / SM2 before? Maybe a version issue or something.

How about if we try this:

Delete c:/users/public/public documents/synthmaster/presets folder contents
Delete c:/users/public/public documents/synthmasterone/presets folder contents
Restore expansions inside SM3.

Are you still having the same problem?

installed thru SM3 (only). and am running the AU in logic pro (so, on a mac). what files should i try deleting?

[kv331]

installed thru SM3 (only). and am running the AU in logic pro (so, on a mac). what files should i try deleting?

Ah, ok. then don't delete anything. I am going to test with Logic Pro.

[fisherKing]

installed thru SM3 (only). and am running the AU in logic pro (so, on a mac). what files should i try deleting?

Ah, ok. then don't delete anything. I am going to test with Logic Pro.

thanx! odd one. and if there's anything for me to try, am in

EDIT: so, in the Arpeggiated list, preset 2 plays for the following presets until i get to preset 12, which plays correctly. but moving back in the list, preset 12 plays until i get to... preset 2

[kv331]

EDIT: so, in the Arpeggiated list, preset 2 plays for the following presets until i get to preset 12, which plays correctly. but moving back in the list, preset 12 plays until i get to... preset 2

Are you scrolling through presets in a regular speed? like one preset / second ?

[fisherKing]

EDIT: so, in the Arpeggiated list, preset 2 plays for the following presets until i get to preset 12, which plays correctly. but moving back in the list, preset 12 plays until i get to... preset 2

Are you scrolling through presets in a regular speed? like one preset / second ?

this is what's happening -

[kv331]

this is what's happening -

I tested with Logic Pro, and used the exact same presets. Here's what I see, can not reproduce it so far. Sorry

https://www.dropbox.com/scl/fi/glzgy65p ... 8osdi&dl=0

[fisherKing]

this is what's happening -

I tested with Logic Pro, and used the exact same presets. Here's what I see, can not reproduce it so far. Sorry

https://www.dropbox.com/scl/fi/glzgy65p ... 8osdi&dl=0

thanks for checking. any suggestions? otherwise, will live with it for now. anyway don't mean to hijack this thread (and i appreciate your help)