Really like this synth so far, havent checked it out thoroughly but looks very polished.
One thing tho is this power button on the filter supposed to be hidden ?
The preset Harmonica_like 01 has no sound, OSC 1 & 2 are turned off in Out 2 Osc Direct -> AMP
21-07-2025 MuLab (V. 10) First Synth project V. 2.1 AND 2. Synth --> FINISHED (First incl 160 + Soundexamples) <--
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Hi,
Thank you for the tip.
I hope I didn't misunderstand your question. (My English isn't that good sometimes
)
Unfortunately, the text addition "(- SWITCH -)" no longer fits in the text field.
The same applies to the "--> Filter 2" tab. There, too, the filter type can be changed by clicking.
This week I'll upload some more Preset-Examples
google translate
Thank you for the tip.
I hope I didn't misunderstand your question. (My English isn't that good sometimes
)01. I actually considered it at first. But ultimately decided to leave it visible so that the user recognizes that it's not just a name field, but a switch (the filter type can be selected).bibz1st wrote: Sun Jun 08, 2025 8:22 pm Really like this synth so far, havent checked it out thoroughly but looks very polished.
One thing tho is this power button on the filter supposed to be hidden ?
Unfortunately, the text addition "(- SWITCH -)" no longer fits in the text field.
The same applies to the "--> Filter 2" tab. There, too, the filter type can be changed by clicking.
Thx, Fixed (- Solo-Button OUT 1 wrong status)The preset Harmonica_like 01 has no sound, OSC 1 & 2 are turned off in Out 2 Osc Direct -> AMP
This week I'll upload some more Preset-Examples
google translate
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Synth-Project Updated to V. 1.6
(User Folder JdA-Projekt / Templates / Jd_Synth-01-60-Init A.Mux)
Added:
- Envelope 3, Mod and Sample&Hold --> OSC3 PM, Noise, Resonator
- Balance (incl. div. Modulation) 1. Orig --> Filter 1 / 2. Filter 1 --> 2
- - - - -
These version features open up more possibilities for experimental sounds.
Apart from possible bug fixes and new sample sounds to follow later, this project is complete for now.
Due to time constraints, however, I cannot adapt the sample sounds uploaded so far (1.5) to this new synth project version (1.6).
- - - - -
My conclusion of this test project:
I can highly recommend MuLab
1. DAW (Personally, I don’t miss any features there)
2. !! especially because of its sound engine capabilities !!
(User Folder JdA-Projekt / Templates / Jd_Synth-01-60-Init A.Mux)
Added:
- Envelope 3, Mod and Sample&Hold --> OSC3 PM, Noise, Resonator
- Balance (incl. div. Modulation) 1. Orig --> Filter 1 / 2. Filter 1 --> 2
- - - - -
These version features open up more possibilities for experimental sounds.
Apart from possible bug fixes and new sample sounds to follow later, this project is complete for now.
Due to time constraints, however, I cannot adapt the sample sounds uploaded so far (1.5) to this new synth project version (1.6).
- - - - -
My conclusion of this test project:
I can highly recommend MuLab
1. DAW
(Personally, I don’t miss any features there) 2. !! especially because of its sound engine capabilities !!
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Yesterday uploaded wrong version. Now correct incl. :
Added: RND (Random Note OSC 1-3 & Filter 3, SH OSC 1 - 2)
Filter 2 LFO 2 Tempo Mod Amp-Knob missing / Corrected
Added: RND (Random Note OSC 1-3 & Filter 3, SH OSC 1 - 2)
Filter 2 LFO 2 Tempo Mod Amp-Knob missing / Corrected
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
After Testing the last Version and missing 2 Features. Uploaded small UD now (Version 20:01h), Hopefully now finished Some Finetunes Added (RND & SH per OSC Portion adjustable)
-
- KVRAF
- 13851 posts since 24 Jun, 2008 from Europe
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
It was'nt finished. Now Uploaded Version 1.8 (User Folder JdA-Projekt / Templates / Jd_Synth-01-80-Init A.Mux)
Some more finetune (Most about experimental again):
- Key follow --> Envelopes (missed it to much)
- New Modulation (2)-Page
- RND / wobble SH Mod can be mixed with LFO and edit
- LFO 1 Freq & Amp can be modulated via KeyFollow
and some more little fixes ...
hopefully it's finished now
(because it's a little complex now, hopefully no bugs, I'll check again and again)
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Now Uploaded Version 1.85
(User Folder JdA-Projekt / Templates / Jd_Synth-01-85-Init A.Mux)
Some more finetune:
Since the "OSC" section has become too confusing due to expanded functions, I've added an OSC page to the section.
Among other things New features:
- OSC 3 (PM) now has more basic settings accessible.
- All envelopes now have the "KeyFollow" function.
- RND & S/H (wobble) modulation smoothing can be optionally bypassed. (Unfortunately, this is only a workaround, as there is no either/or switch available in MUX yet.)
- - - - -
No new thread:
Now Uploaded Version 1.87
(User Folder JdA-Projekt / Templates / Jd_Synth-01-87-Init A.Mux)
- Added RND to Filter 1 & 2
...
I'll test it again for a few more hours, and if there are no bugs, I'll create a few sound samples for the new features at the end.
(User Folder JdA-Projekt / Templates / Jd_Synth-01-85-Init A.Mux)
Some more finetune:
Since the "OSC" section has become too confusing due to expanded functions, I've added an OSC page to the section.
Among other things New features:
- OSC 3 (PM) now has more basic settings accessible.
- All envelopes now have the "KeyFollow" function.
- RND & S/H (wobble) modulation smoothing can be optionally bypassed. (Unfortunately, this is only a workaround, as there is no either/or switch available in MUX yet.)
- - - - -
No new thread:
Now Uploaded Version 1.87
(User Folder JdA-Projekt / Templates / Jd_Synth-01-87-Init A.Mux)
- Added RND to Filter 1 & 2
...
I'll test it again for a few more hours, and if there are no bugs, I'll create a few sound samples for the new features at the end.
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Now Uploaded Version 1.90
(User Folder JdA-Projekt / Templates / Jd_Synth-01-90-Init A.Mux)
Never ending story 
(No ... ) ...
Based on final testing, I felt that a "final touch!" was still necessary:
To mitigate some issues (e.g., feedback), both the "Noise Envelope" and a separate KeyFollow function can be assigned to the "Resonator" section.
I never thought this project would be a) so complex... b) take me so long
(too many ideas )
So NOW I'll test it one last time again for a few more hours, and if there are no bugs, THEN !! I'll create a few sound samples for the new features at the end.
(User Folder JdA-Projekt / Templates / Jd_Synth-01-90-Init A.Mux)
Never ending story
(No ... ) ... Based on final testing, I felt that a "final touch!" was still necessary:
To mitigate some issues (e.g., feedback), both the "Noise Envelope" and a separate KeyFollow function can be assigned to the "Resonator" section.
I never thought this project would be a) so complex... b) take me so long
(too many ideas
)So NOW I'll test it one last time again for a few more hours, and if there are no bugs, THEN !!
I'll create a few sound samples for the new features at the end.-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Version 2 uploaded.
(User folder JdA-Projekt / Templates / Jd_Synth-02-00-Init A.Mux)
This *.Mux synth project should now be complete.
This plugin is primarily intended to encourage experimentation. However, it is also suitable for creating bread-and-butter synth sounds (as I discovered to my surprise )
- - - - -
Since I've been asked, I'll spend the next few days migrating the (actually) previously uploaded sounds (previous versions) to this new and final version. I'll also, of course, create some new sound examples that demonstrate the capabilities of the current version. So please just check the download area from time to time.
You can ultimately identify the uploaded or newly created sounds by the upload/creation date. (Starting after June 26, 2025)
- - - - -
I've edited the initial post of this thread. Screenshots of the current version 2.0 can be found there.
- - - - -
I would be happy if it finds favor.
Best regards, Jd
(User folder JdA-Projekt / Templates / Jd_Synth-02-00-Init A.Mux)
This *.Mux synth project should now be complete.
This plugin is primarily intended to encourage experimentation. However, it is also suitable for creating bread-and-butter synth sounds (as I discovered to my surprise
)- - - - -
Since I've been asked, I'll spend the next few days migrating the (actually) previously uploaded sounds (previous versions) to this new and final version. I'll also, of course, create some new sound examples that demonstrate the capabilities of the current version. So please just check the download area from time to time.
You can ultimately identify the uploaded or newly created sounds by the upload/creation date. (Starting after June 26, 2025)
- - - - -
I've edited the initial post of this thread. Screenshots of the current version 2.0 can be found there.
- - - - -
I would be happy if it finds favor.
Best regards, Jd
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
jd88 wrote: Thu Jun 26, 2025 2:45 pm Version 2.1 uploaded.
(User folder JdA-Projekt / Templates / Jd_Synth-02-10-Init A.Mux)
This *.Mux synth project should now be complete.
This plugin is primarily intended to encourage experimentation. However, it is also suitable for creating bread-and-butter synth sounds (as I discovered to my surprise
- - - - -
Since I've been asked, I'll spend the next few days migrating the (actually) previously uploaded sounds (previous versions) to this new and final version. I'll also, of course, create some new sound examples that demonstrate the capabilities of the current version. So please just check the download area from time to time.
You can ultimately identify the uploaded or newly created sounds by the upload/creation date. (Starting after June 26, 2025)
- - - - -
I've edited the initial post of this thread. Screenshots of the current version 2.0 can be found there.
- - - - -
I would be happy if it finds favor.
Best regards, Jd
Sound-Example Starting today
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Uploaded updated 160 + Soundexamples (Synth Version 2.1)
(User folder JdA-Projekt / JdSounds / Jd... .Mux)
So Project closed for now. have fun
- - - - -
Please, (hopefully) fix this massive OSC-restriction (voice steeling priority).
It is so unfortunate that the use of the synth engine because that case is currently so limited.
THX
(User folder JdA-Projekt / JdSounds / Jd... .Mux)
So Project closed for now. have fun
- - - - -
Please, (hopefully) fix this massive OSC-restriction (voice steeling priority).
It is so unfortunate that the use of the synth engine because that case is currently so limited.
THX
-
- KVRist
- Topic Starter
- 121 posts since 7 Apr, 2008 from germany
Hi,
Here's a fundamentally easy-to-use *.mux synth project "Jd_R601EX," which I initially started for personal use only. But maybe someone else might like to use it?!
As long as you ignore the "tabs" (in the middle of the plug-in), the plug-in is really fast and intuitive to use. You get results very quickly. "Bread and butter" synth sounds.
- - - - -
more Information in Thread "MuLib" ( viewtopic.php?t=483718&start=330)
- - - - -
- - - - -
pic:
NEW: "Jd_R601EX":
MuLib —> User Folders —> JdA-Projekt —> Jd_R601EX —> Templates
-
First Project "Jd_Synth 01":
-
MuLib —> User Folders —> JdA-Projekt —> Jd_Synth 01 —> Templates (or Jd-Sounds)
Here's a fundamentally easy-to-use *.mux synth project "Jd_R601EX," which I initially started for personal use only. But maybe someone else might like to use it?!
As long as you ignore the "tabs" (in the middle of the plug-in), the plug-in is really fast and intuitive to use. You get results very quickly. "Bread and butter" synth sounds.
- - - - -
more Information in Thread "MuLib" ( viewtopic.php?t=483718&start=330)
- - - - -
- - - - -
pic:
NEW: "Jd_R601EX":
MuLib —> User Folders —> JdA-Projekt —> Jd_R601EX —> Templates
-
First Project "Jd_Synth 01":
-
MuLib —> User Folders —> JdA-Projekt —> Jd_Synth 01 —> Templates (or Jd-Sounds)
You do not have the required permissions to view the files attached to this post.
Last edited by jd88 on Mon Jul 21, 2025 4:59 pm, edited 2 times in total.
-
- KVRAF
- 13851 posts since 24 Jun, 2008 from Europe
Hello jd88,
I finally found the time to go thru all your new MUX presets.
Thanks so much for sharing these
I'll include them in the MuLab 10 factory lib in a separate "JdA-Projekt" folder.
Question: Why did you choose to limit the polyphony for almost all presets?
Of course i understand the advantage of making certain sounds monophonic or duophonic, but what's the advantage for the user of making sounds have only 6 or 12 polyphones instead of the default 64 voices? Note that it's not easy for someone who doesn't know MUX from the modular side to change that polyphony. So would it be ok with you that this polyphony limit would be removed for presets with polyphony limit >= 3? I'll take that job for the 160+ presets on me as i'll intend to semi-automate that job.
Anyway, congrats on your awesome MUX creativity and big thanks for sharing the results!!
I finally found the time to go thru all your new MUX presets.
Thanks so much for sharing these
I'll include them in the MuLab 10 factory lib in a separate "JdA-Projekt" folder.
Question: Why did you choose to limit the polyphony for almost all presets?
Of course i understand the advantage of making certain sounds monophonic or duophonic, but what's the advantage for the user of making sounds have only 6 or 12 polyphones instead of the default 64 voices? Note that it's not easy for someone who doesn't know MUX from the modular side to change that polyphony. So would it be ok with you that this polyphony limit would be removed for presets with polyphony limit >= 3? I'll take that job for the 160+ presets on me as i'll intend to semi-automate that job.
Anyway, congrats on your awesome MUX creativity and big thanks for sharing the results!!