Korg Collection 6 with PS-3300, Trinity and SGX-2 Piano
-
- KVRist
- 438 posts since 15 Oct, 2001 from Santa Fe, NM
Whoa. I finally found the Locking Code. Had to pretend I was registering my already registered Collection 5 in the KORG Software Pass, then hold down the Shift key and click Start to activate offline. Then it shows my Locking Code. OMG.
-
- KVRist
- 438 posts since 15 Oct, 2001 from Santa Fe, NM
Spoke too soon. It says my Product Code is invalid. Tried several times copying and pasting from Collection 5 purchase email. And it only pastes in the first half of the Product Code, like it doesn't allow enough characters for my product code. Oh man.abernathy wrote: Sat Nov 01, 2025 2:52 pm Whoa. I finally found the Locking Code. Had to pretend I was registering my already registered Collection 5 in the KORG Software Pass, then hold down the Shift key and click Start to activate offline. Then it shows my Locking Code. OMG.
It seems the upgrade requires 3 different KORG sites. Korg.shop, id.korg.com, and korguser.net PLUS the KORG Software Pass app, oh, and the support.korguser.net site if you need help. And comically there are all these ancient posts about how KORG has migrated away from the korguser.net site.
-
- KVRist
- 156 posts since 8 Sep, 2005
Did some specific message or email direct you to that specific page, with the request for the locking code and mention of a USB key? If so, I’m very interested to see it. To get you up and running I’d suggest contacting Korg app support, who will be very happy to help: https://support.korguser.net/hc/en-us/requests/new
Dan Phillips
Manager of Product Development, Korg R&D
Manager of Product Development, Korg R&D
-
- KVRist
- 438 posts since 15 Oct, 2001 from Santa Fe, NM
Thanks! I'll try to get this straight. I go to korg.shop to buy the upgrade and it says, "It is necessary to apply a coupon code to buy this item." I click "Learn more" and it directs me to korguser.net. I go to "UPGRADE COUPON" and discover that my Collection 5 has not been registered on my korguser.net account. I click on REGISTER PRODUCT to register it with my product code which looks like K-AK5UG0-BE08-7E4A-64D4-XXXX. It only takes the first 15 characters, and then says the product code is invalid. I have filed a case at that support link.danatkorg wrote: Sat Nov 01, 2025 5:37 pm Did some specific message or email direct you to that specific page, with the request for the locking code and mention of a USB key? If so, I’m very interested to see it. To get you up and running I’d suggest contacting Korg app support, who will be very happy to help: https://support.korguser.net/hc/en-us/requests/new
-
- KVRAF
- 9840 posts since 15 Sep, 2005 from East Coast of the USA
I just checked out the demo of Trinity. Very nice!
Sounds great.
Sounds great.
-
- KVRian
- 762 posts since 23 Dec, 2011
+1Examigan wrote: Sat Nov 01, 2025 7:20 pm I just checked out the demo of Trinity. Very nice!
Sounds great.![]()
Just downloaded and dinked around with the Trinity demo. Very nice timbres/patches. My upgrade from Collection 5 to Collection 6 is $99 US. Havent tried the PS-3300, but if Dan's team did that one... Im all in on the upgrade.
- KVRAF
- 2627 posts since 16 May, 2004 from Soviet Union
Trying PS3300 now.
19% eating in default idle state (init preset), or 27% with single pressed note (even with poly 1, and it's still only single saw wave). Can't figure what going on lol.
No, did walking thru presets - there is nice sounding things. But seriously.
I remember complained to Bazille' eating, but this time seems Bazille looks lightweight by compare (and with zero eat with init state).
Certainly would be good some quality adjustment option or something. But seems there is not here.
Upd
Else thing, the LFO's (Mod Generators) freq knob seems has no impact after 9.2 value. Curiously if that by design.
Upd2 ok Seems this is some handle' reserve for sync tempo mode for max division.
19% eating in default idle state (init preset), or 27% with single pressed note (even with poly 1, and it's still only single saw wave). Can't figure what going on lol.
No, did walking thru presets - there is nice sounding things. But seriously.
I remember complained to Bazille' eating, but this time seems Bazille looks lightweight by compare (and with zero eat with init state).
Certainly would be good some quality adjustment option or something. But seems there is not here.
Upd
Else thing, the LFO's (Mod Generators) freq knob seems has no impact after 9.2 value. Curiously if that by design.
Upd2 ok Seems this is some handle' reserve for sync tempo mode for max division.
- KVRAF
- 2627 posts since 16 May, 2004 from Soviet Union
Sorry, for who already familiar with PS3300 structure - i'm wondering about main "Signal Out" output (in upper right corner, inside each of three synths sections) - is this not able to be "instant generate" ? And so that really by design (as in original) ?
For clarify (what i mean) - LFO output is instant here, ie if we connect it to master signal mixer (EXT Input 1, in right side) - we get audio signal instantly, with no keyboard.
The same for oscillators outputs in Arp2600 (for example) - each can be connect to master mixer and sound will be instant.
But in PS3300 it seems this (osc output) works driven by keyboard\envelope only ? Or there is some trick. Just a bit boring if not.
User manual says about this output not a much (the same as tip info built in UI):
For clarify (what i mean) - LFO output is instant here, ie if we connect it to master signal mixer (EXT Input 1, in right side) - we get audio signal instantly, with no keyboard.
The same for oscillators outputs in Arp2600 (for example) - each can be connect to master mixer and sound will be instant.
But in PS3300 it seems this (osc output) works driven by keyboard\envelope only ? Or there is some trick. Just a bit boring if not.
User manual says about this output not a much (the same as tip info built in UI):
But it is unclear whether it is permanent (or Can be, somehow) or only runs from envelope.SIGNAL OUT
This is the polyphonic audio output of the PSU-3301 synth panel.
You do not have the required permissions to view the files attached to this post.
- KVRAF
- 4868 posts since 13 May, 2004
If you want to import your own preset banks into the Trinity plugin, here is how 
-
- KVRAF
- 9578 posts since 5 Aug, 2009
are there any good preset packs out there for Trinity you can recommend anyone?
DAW FL Studio Audio Interface Focusrite Scarlett 1st Gen 2i2 CPU Intel i7-7700K 4.20 GHz, RAM 32 GB Dual-Channel DDR4 @2400MHz Corsair Vengeance. MB Asus Prime Z270-K, GPU Gainward 1070 GTX GS 8GB NT Be Quiet DP 550W OS Win10 64Bit
- KVRAF
- 37376 posts since 14 Sep, 2002 from In teh net
Thanks very useful - I noticed some Prophecy banks converted to Trinity format in there but I presume those will not be importable no matter what people do because this version does not emulate the MOSS board?moss wrote: Sun Nov 02, 2025 9:43 am If you want to import your own preset banks into the Trinity plugin, here is how
- KVRAF
- 3031 posts since 6 Jul, 2013
Here's that 01/W Program bank copied into USER-A. It's 100 programs.moss wrote: Sun Nov 02, 2025 9:43 am If you want to import your own preset banks into the Trinity plugin, here is how
On the Mac, that's ~/Documents/KORG/TRINITY/UserBanks/Program/
(just replace the "USER-A" folder with this one)
Note that this method only lets you copy the programs, as the General MIDI bank doesn't have an associated Combi bank - you'd have to replace one of the others that does to get those. I haven't looked, but if someone can verify that 01/W bank on KorgForums also has combis, I'll copy them across too and re-upload.
Edit: Ah there was one prog I missed, will fix it later...
You do not have the required permissions to view the files attached to this post.
Last edited by beely on Sun Nov 02, 2025 7:05 pm, edited 1 time in total.
-
- KVRAF
- 1892 posts since 9 Jul, 2014 from UK
define goodCaine123 wrote: Sun Nov 02, 2025 10:50 am are there any good preset packs out there for Trinity you can recommend anyone?
I wonder what happens if I press this button...
-
- KVRist
- 311 posts since 31 Oct, 2015
Updated MS-20, minikorg, and Odyssey to the upper standard of arp 2600 and ps3300 would be great ! Simpler synths have their prosEvilDragon wrote: Thu Oct 30, 2025 10:35 pmWould be great to update the MS-20 plugin with all new DSP tech, have an option for "legacy mode" to retain patch compatibility, etc.danatkorg wrote: Thu Oct 30, 2025 10:07 pmIn the software, we offer a choice between this unique filter and the MS-20 filter, using our latest MS-20 lowpass model from the multi/poly.![]()
- KVRist
- 228 posts since 26 Sep, 2013
it appears that it is the output of the entire 3301 module - including envelope, filter, resonator, etc.c_voltage wrote: Sun Nov 02, 2025 4:13 am But it is unclear whether it is permanent (or Can be, somehow) or only runs from envelope.
Last edited by Phil999 on Sun Nov 02, 2025 2:29 pm, edited 1 time in total.
