Introduction to SlickEQ and SlickEQ GE by Dan Worrall (Video)

Official support for: tokyodawn.net/tokyo-dawn-labs
User avatar
FabienTDR
KVRian
1103 posts since 24 Feb, 2012

Post Fri Oct 10, 2014 2:38 pm

Fabien from Tokyo Dawn Records

Check out my audio processors over at the Tokyo Dawn Labs!

3ee
KVRAF
3822 posts since 8 Mar, 2006

Post Fri Oct 10, 2014 3:11 pm

great tutorial, very well explained! :tu:
...great plugin as well!

User avatar
Aiynzahev
KVRAF
3710 posts since 29 Jun, 2011 from USA

Post Sat Nov 01, 2014 4:54 pm

Yeah great video.

I wonder, would it be possible to introduce a final scale/amount knob? I love those.
Aiynzahev-sounds
Sound Designer - Soundsets for Pigments, Repro, Diva, Virus TI, Nord Lead 4, Serum, DUNE2, Spire, and others

User avatar
FabienTDR
KVRian

Topic Starter

1103 posts since 24 Feb, 2012

Post Thu Nov 06, 2014 6:54 am

Aiynzahev wrote:Yeah great video.

I wonder, would it be possible to introduce a final scale/amount knob? I love those.
Question is, how would this interact with auto-gain? I suspect it could seriously confuse the user (similar to Tilt with auto-gain, where the freq setting becomes pointless). I generally try to avoid "dead angles" in the UI concepts, and think that an overall scale knob creates new dead angles and only very little benefit.
Fabien from Tokyo Dawn Records

Check out my audio processors over at the Tokyo Dawn Labs!

User avatar
Aiynzahev
KVRAF
3710 posts since 29 Jun, 2011 from USA

Post Thu Nov 06, 2014 7:30 am

If I'm not mistaken a scale knob just acts the same as you having your hands on each control and dialing them all back at the same time (or forward for more effect).

So pulling the scale control back from 100% would just move everything closer to a default 0 setting. The point is you've selected your frequency, bell & distortion settings already and you want to hear a more subtle version or a more full on version. Although you have A/B which is useful too.

So my answer to your autogain question would be: The same way doing it manually would affect the autogain.

Equality has autogain and a scale slider IIRC.

Or am I missing something here?.. Anyhow it's great as it is. I just love scale controls.

By the way, that group delay control is so cool. So glad you put that on there.
Aiynzahev-sounds
Sound Designer - Soundsets for Pigments, Repro, Diva, Virus TI, Nord Lead 4, Serum, DUNE2, Spire, and others

User avatar
Hermetech Mastering
KVRAF
1595 posts since 30 May, 2003 from Milan, Italy

Post Fri Nov 07, 2014 8:46 am

Do you mean that Phi button? I love having it as an option. If I'm not using the low EQ, I like to just engage the Phi at different frequencies (depending on the tracks bass and kick etc.), and see if it sounds better or worse. Has some kind of very strange effect on the sound! Sometimes great, sometimes not.

User avatar
Aiynzahev
KVRAF
3710 posts since 29 Jun, 2011 from USA

Post Fri Nov 07, 2014 10:18 am

Hermetech Mastering wrote:Do you mean that Phi button? I love having it as an option. If I'm not using the low EQ, I like to just engage the Phi at different frequencies (depending on the tracks bass and kick etc.), and see if it sounds better or worse. Has some kind of very strange effect on the sound! Sometimes great, sometimes not.
Yeah I love it. Sometimes I record my voice for videos. The sound is similar to what you get with extreme compression on analog modeled comps. like all buttons in on 76. It also reminds me of that radio voice.

I think it's all to do with phase rotation, thats my big new word.
Aiynzahev-sounds
Sound Designer - Soundsets for Pigments, Repro, Diva, Virus TI, Nord Lead 4, Serum, DUNE2, Spire, and others

legendCNCD
KVRian
1227 posts since 23 Sep, 2004 from Kocmoc

Post Thu Jul 14, 2016 5:21 am

This is how you do the introduction!
Smooth tunes with smooth voice and the order of things introduced was just right. Kudos for the video and almost too good (?) EQ plugin guys.
Soft Knees - Demoscene - Live 10 - Diva - Omnisphere - Slate Digital VSX - TDR - Kush Audio - Fabfilter - PA - Valhalla - Fuse - Pulsar - NI - OekSound etc...

alexandredesroches
KVRer
23 posts since 27 Dec, 2016

Post Fri Jul 27, 2018 3:54 am

Hello,
According to the SlickEQ Manual:
Input / Output resolution: 32bit floating point
Internal resolution: 64bit floating point

I am trying to understand what it is.
Are the input and output resolution maximum Audio BitDepth in can manipulate or audio processing caracteristics?
For example, if we use a DAW that uses a 64bit architecture, and 64bit floating point mixing engine, we hear the words like true 64bit mixing environnement... Is that what the plugin offers?

Please if possible make an educated article to clarify this, I've been looking everywhere for accurate scientific infos and can't b sure of what I read at all.

Thanks in advance this is a very interesting topic :)
Alex

User avatar
FabienTDR
KVRian

Topic Starter

1103 posts since 24 Feb, 2012

Post Sat Feb 09, 2019 10:13 am

SlickEQ and SlickEQ GE haven't been updated yet to support the 64bit I/O VST extension (= the plugin's own inputs and outputs). But this follows with the forthcoming update!

I/O precision doesn't affect the plugin's function. Processing precision is a completely separate matter running inside the plugin, under full control of the developer.
Fabien from Tokyo Dawn Records

Check out my audio processors over at the Tokyo Dawn Labs!

omiroad
KVRist
385 posts since 16 Mar, 2015

Post Fri Feb 22, 2019 6:58 am

FabienTDR wrote:
Sat Feb 09, 2019 10:13 am
But this follows with the forthcoming update!
Will the update also give it up to 150 or 200% scaling? That would be sweet...

justified
KVRian
629 posts since 6 Apr, 2004

Post Sun Jun 30, 2019 5:46 pm

Is there a way to demo SlickEQ GE? I'd like to check how well Match reference, De-resonate work

User avatar
jethrobull
KVRAF
2424 posts since 5 Jun, 2011 from Preston, England, UK

Post Sun Jun 30, 2019 7:31 pm

justified wrote:
Sun Jun 30, 2019 5:46 pm
Is there a way to demo SlickEQ GE? I'd like to check how well Match reference, De-resonate work
Hi,this is from their website : Please refer to the standard edition for a free and fully functional demonstrator of TDR VOS SlickEQ – Gentleman’s Edition's core features.
https://www.tokyodawn.net/tdr-vos-slickeq/
The inner workings of vurts mind are a force to be reckoned with.
music is a need in my life...yes I could survive without it but tbh I dont know how
myfeebleeffort
https://paulroach2.bandcamp.com/
https://hearthis.at/83hdtrvm/

martinjuenke
KVRAF
5404 posts since 28 Dec, 2015 from Hanover, Germany

Post Mon Jul 01, 2019 1:52 am

justified wrote:
Sun Jun 30, 2019 5:46 pm
Is there a way to demo SlickEQ GE? I'd like to check how well Match reference, De-resonate work
It works quite good.

justified
KVRian
629 posts since 6 Apr, 2004

Post Mon Jul 01, 2019 2:11 am

jethrobull wrote:
Sun Jun 30, 2019 7:31 pm
justified wrote:
Sun Jun 30, 2019 5:46 pm
Is there a way to demo SlickEQ GE? I'd like to check how well Match reference, De-resonate work
Hi,this is from their website : Please refer to the standard edition for a free and fully functional demonstrator of TDR VOS SlickEQ – Gentleman’s Edition's core features.
https://www.tokyodawn.net/tdr-vos-slickeq/
It looks like Match reference and De-resonate aren't core features and are not available in free version.

Return to “Tokyo Dawn Labs”