Log InCreate An Account
  1. Plugins
  2. »
  3. Daniel Gergely
  4. »
  5. Emergence
  6. »
  7. Downloads

Full Version or Demo Download Links for Emergence

Downloads, Banks, Patches, Presets, etc. Upload & Share

 
muki
for Emergence [Show all for]
by muki [Show all by] on 22 September 2021
Downloaded: 423 timesGranular
just a few presets in Logic's .aupreset format enjoy

Comments & Discussion for Daniel Gergely Emergence

Discussion
Discussion: Active
onerob
onerob
21 July 2021 at 2:19pm

Sounds good from the videos. Any hope of a Mac version?

daniel_
daniel_
21 July 2021 at 5:01pm

Thanks! I would love to release a mac version in the future but I'm not sure when this will happen.

Hunt in z0O
Hunt in z0O
12 August 2021 at 1:16pm

It's a nice plugin rich in creative .

DesCtrl
DesCtrl
19 September 2021 at 8:38pm

i love this one so much! but i'm having issues with the UI on windows, it appears too big and i can't see some of the plug-in interface... have anyone had a similar problem??

daniel_
daniel_
20 September 2021 at 4:21pm

Hi! Thanks for reporting this.
Displays at least 1080 pixels high shoud be fine but I can see how this could be an issue on smaller screens.

Could you give me some more info about your system so I can look into this?
What is your screen resolution and do you have any scaling applied? Which DAW are you using?

DesCtrl
DesCtrl
20 September 2021 at 6:25pm

hey of course! my resolution is 1366 x 768, scaling is at 100%(default) and so far i've tried loading it in Waveform/Tracktion and Bespoke :).

daniel_
daniel_
21 September 2021 at 5:03pm

Thanks! I will fix this in the next update. Stay tuned.

DesCtrl
DesCtrl
21 September 2021 at 7:18pm

i'll sure do <3.

mm.thrive
mm.thrive
22 September 2021 at 11:31am

I tried it in Reaper on my Macbook Pro 13-inch and it is not functioning properly. The GUI shows without the upper animated display. The cursor is not affecting the specific knob I put it on, but the knob two rows above it. I also checked it on Hosting AU and there it is functioning ok, displaying the animated part and being able to move the exact knobs with my cursor but the GUI is not fitting on my screen showing only until the LFO knobs row. And in Studio One it works ok but it shows even less than that, only until the LFO labels. I'm on High Sierra OS.
Even so I played with it a bit and it seems to have a great potential and to be a good creative tool.

daniel_
daniel_
22 September 2021 at 5:18pm

Others already mentioned the screen size issue, I'll fix that in the next update!
I'm not sure about the cursor offset though. Can you tell me which version of reaper are you using?

THIS POST HAS BEEN REMOVED

mm.thrive
mm.thrive
22 October 2021 at 10:47am

Hi Daniel,
I just updated to 0.2.2 and it seems to work fine now. Thank you.
I am exploring more now how it is functioning.

killmaster
killmaster
21 October 2021 at 12:16am

I'm on OS X 11.6 Big Sur and the VST3 version will not open cause it says Apple can't check it for malicious software. AU works fine. Thank you! Just thought you'd like to know that VST3 doesn't seem to work in Big Sur.

daniel_
daniel_
22 October 2021 at 8:59am

Can you confirm that you did the Terminal command step described in the readme for the VST3 too?

PierreG
PierreG
22 October 2021 at 8:17pm

First release of Emergence worked great in Waveform, then 2.0 and now 2.2 both produce a black screen when the GUI is opened. Tracktion devs suggest it may be a JUCE version / bug issue.

THIS POST HAS BEEN REMOVED

PierreG
PierreG
22 October 2021 at 8:22pm

And... I just read in the readme file that this is likely an OpenGL version issue. "- OpenGL 3 or higher" is required. I'm using an ancient laptop that is stuck in 2.0. You must have complied the newer versions with this requirement. Please confirm.

Robvg
Robvg
15 February 2022 at 9:11am

Hi Daniel,
Looks like an amazing plugin.
I have a problem installing.
Tried the ways you described:
On my MacBook Pro 202, Monterey.
First maclike really hard to find the folders..I found /Library/Audio/Plug-Ins but there's no folder VST3
I made a new folder VST3 and put the .VST3 in there
I opened terminal and paste your code, run and it says 'password' showing a key icon, tried to type something, this wouldn't work
Is this my Windows curve not making me understand the workflow, or something else?
Can you help?
Thanks, grt. Rob.

Robvg
Robvg
15 February 2022 at 12:48pm

It appeared in my folder structure inside Studio One, when I insert it on an audio channel It prompts ' Emergence. component cannot be opened because cannot check it for malicious software' .
One step further, but what to do now?
Thanks.

daniel_
daniel_
15 February 2022 at 6:28pm

Hey Rob.

The Terminal command is basically the same for both the VST3 and AU format, just make sure you type in the path where you have copied the plugin.

When the password prompt with the key icon shows up you have to type in your password then press the enter key. Note that your password will not show up on the screen as you type. After that if you typed everything correctly you should be able to type normally again and see no error messages. You can start your DAW now and it should load the plugin.

Robvg
Robvg
15 February 2022 at 11:04pm

When I type my password, it says:

attr: No such file: /Library/Audio/Plug-Ins/Components/Emergence.component.

robvangameren@MBP-van-Rob ~ %

I copy pasted the .components on the path above, inside library- audio a.s.o.

What am I missing.




daniel_
daniel_
22 February 2022 at 7:44pm

Hi Rob.

I tried sending you a private message but can't (because of your account settings).
Could you message me so we can sort this out?

oniram
oniram
22 March 2022 at 11:23pm

Hello, I downloaded Emergence to use with Cubase 8 Elements, in Windows 10 64-bit.

I followed the instrucions of copying the Emergence.vst3 folder into the c:/Program Files/Common Files/VST3/ directory.

Still, Emergence doesn't show among the VST instruments in Cubase. All my other VST3 pluging are in that same folder, and they show in Cubase and open regularly. It's just Emergence that doesn't appear.

As a rather desperate attempt, I also tried to copy just the naked Emergence.vst3 file into the same folder, but as expected, the result was the same... it did not appear on the list of VST instruments in Cubase.

Any ideas? Thanks in advance.

Carlo.

daniel_
daniel_
23 March 2022 at 6:08pm

Hi!
If you go to Devices -> Plugin Manager you should see two tabs: VST Effects and VST Instruments.
Emergence should be in the Effects category.

If it is not there you can also try re-scanning the plugin list.
I don't have cubase but I guess there should be an option for this somewhere in the Plugin manager window.

THIS POST HAS BEEN REMOVED

oniram
oniram
23 March 2022 at 11:10pm

Daniel - thanks, I am an idiot. It's there indeed.

For some reason, I had assumed that Emergence would have considered an instrument - but being a granulator, it needs an audio input - so in a DAW, it's considered an effect. Makes sense.

Thank you for this great, free, umm - instrument. : -).

THIS POST HAS BEEN REMOVED

robotica
robotica
5 May 2022 at 12:55am

Hi Daniel,
Please help if you can.
I'm trying to install Emergence (AU component) on a Mac (a recent M1 Mac running Big Sur OS), but Terminal won't recognize that it is there.

I first copied the file Emergence.component into /Library/Audio/Plug-Ins/Components/.

Then I entered the Terminal command:
sudo xattr -rd com.apple.quarantine /Library/Audio/Plug-Ins/Components/Emergence.component.

But Terminal returned this:
xattr: No such file: /Library/Audio/Plug-Ins/Components/Emergence.component.

I've checked to be sure that the Emergence.component file is actually in place in: Library/Audio/Plug-Ins/Components/
- and it is there.

So any idea where my problem is occurring? Or any workaround?
Can't wait to give Emergence a try.

Thanks for your help!
Randall.

daniel_
daniel_
5 May 2022 at 7:56am

Hi Randall,

You no longer need to do the terminal thing to install the plugin. You can find the latest version here: https://daniel-gergely.itch.io/emergence

Just download and run the .pkg installer, and you should be able to use the plugin in your DAW.

robotica
robotica
5 May 2022 at 9:21am

Thanks for the quick answer, Daniel.

I'll go grab the latest version and hopefully that'll fix it.

Thanks so much.

Randall.

THIS POST HAS BEEN REMOVED

david charpy
david charpy
23 September 2022 at 3:33pm

Hello,

does a notice exist ?

THIS POST HAS BEEN REMOVED

vujadejunky
vujadejunky
21 October 2022 at 5:17am

Any plans to add presets? Or the ability to save settings? This seems like a great plug-in (from what I seen from what others can do with it), but I'm having trouble getting great results with it (will spend more time on it). Some presets would really help. I find it easier to start with a great sounding preset and learn what it does by tweaking, rather than just start completely from scratch.

I'm also using this in Reason, which doesn't support VST3, so I'm using it through Waves Studio Rack, so it's also possible this functionality is already there but not accessible via StudioRack (found this to be the case with McDSP's plug-ins after I purchased EC-300, doh!).

And is there a way to sync this to the DAW clock, or do we just have to do the math? :).

vujadejunky
vujadejunky
21 October 2022 at 5:26am

And is there a way to reset it? Besides deleting the plugin and creating a new instance I don't see a way to just clear all the settings back to default.

daniel_
daniel_
21 October 2022 at 8:20am

Hey! I totally see your point about the presets. I will probably add this feature at some point (and ship some factory presets with the plugin) but there are a couple of other things I want to do before that. Same with the reset. For now these things can be done by most DAWs, I haven't tried StudioRack so I'm not sure if this works well with your setup.

Tempo Sync is coming in v1.0, you can already try it in the latest beta.

vujadejunky
vujadejunky
22 October 2022 at 6:30pm

Thanks for the reply Daniel! Looking forward to the updates.

Please log in to join the discussion