Login / Register  0 items | $0.00 NewWhat is KVR? Submit News Advertise

Downloads, Banks, Patches, Presets, etc.

Upload & Share

These are 45 sounds, both acoustic and electronic, created to be nicely playable with a MIDI keyboard (modwheel and pitchbend). Amongst others there are e-pianos, pads, organs, voices, leads, basses, winds ...
Some unison sounds need to be played for a while after loading in order to scramble the voices' phase offset and make the sound consistent.

Some of the sounds where used in my submission to One Synth Challenge #98 (No Rush, see https://sites.google.com/site/kvrosc/osc-98-aos-2)
 
thanks Ms Ichiro 12 Synth1 bank
for Synth1 [Show all for]
by aaa bbb [Show all by] on 23 July 2017
Downloaded: 141 times
sound bank for Synth1
 
thanks Ms Ichiro 11 Synth1 bank
for Synth1 [Show all for]
by aaa bbb [Show all by] on 2 March 2017
Downloaded: 509 times
sound bank for Synth1
 
Patches from Photonic - Signal Lost
for Synth1 [Show all for]
by photonic [Show all by] on 2 January 2017
Downloaded: 489 times
Those are all sounds I used for my track for KVR OSC#94:
https://soundcloud.com/photonic-1/photonic-signal-lost

Some patches needs to be layered (cymbals, organs, kick...). So look for comments in brackets in the patch name.
 
CmdRobot Chiptune & Lofi Bank
for Synth1 [Show all for]
by CommanderRobot [Show all by] on 16 November 2016
Downloaded: 645 times
Hello nice people from KVR,
this is my collection of sounds for Synth1!

I didn't want to upload the 1000th collection of dance-patches so I tried to focus on lofi- and chiptune-sounds with a dirty, non-synth1-y edge. And even if I got sidetracked here and there I still hope you like it!

Cheers

Commander Robot
 
thanks Ms Ichiro 10
for Synth1 [Show all for]
by aaa bbb [Show all by] on 26 June 2016
Downloaded: 727 times
sound bank for synth1
 
Synth 1 Famous Sounds addendum
for Synth1 [Show all for]
by bstageboss [Show all by] on 12 June 2016
Downloaded: 1044 times
A few followup patches from the Famous Sounds thread by PM request.
 
thanks Ms Ichiro 09
for Synth1 [Show all for]
by aaa bbb [Show all by] on 12 March 2016
Downloaded: 1120 times
sound bank for synth1
 
Electric Dreams
for Synth1 [Show all for]
by Argon2005 [Show all by] on 3 March 2016
Downloaded: 1236 times
A Set of

20 Basses
28 melodic Sounds
16 Pads
08 Arpeggios

2 Soundsamples included as mp3-File
(Crazy Oscillator and Pad No. 13)

Enjoy
 
Argon
for Synth1 [Show all for]
by Argon2005 [Show all by] on 14 February 2016
Downloaded: 1211 times
A Set of 128 Presets. No SFX, Claps, Hits, HiHats, and so on.
Synthematic - Techno Illusion is a Soundset for Ichiro Toda Synth1 Plugin for Mac and Windows, there are 21 sounds, all edited from the previous upload last year [at Audiobombs.com]
 
Nielsen EDM
for Synth1 [Show all for]
by [Show all by] on 31 December 2015
Downloaded: 1050 times
Follow me on soundcloud.com/nielsensound and like my page facebook.com/Nielsen-Sound-763629790447085 to support me for the hardwork :)
more soundbanks and samples on sellfy.com/NielsenSound
 
I Let The Dogs Out
for Synth1 [Show all for]
by barrybitter [Show all by] on 4 November 2015
Downloaded: 875 times
A Bank of 64 for synth 1
 
thanks Ms Ichiro 08 Synth1 bank
for Synth1 [Show all for]
by aaa bbb [Show all by] on 28 August 2015
Downloaded: 1223 times
preset for Synth1
 
BonkerBank
for Synth1 [Show all for]
by crispydinner [Show all by] on 12 August 2015
Downloaded: 1089 times
Mini bank with 30 presets, containing mostly stabby/donky leads and bases for various genres of electronic dance music production

enjoy
 
Star-Nam Bank (+Bonus Patches)
for Synth1 [Show all for]
by KoolKool [Show all by] on 16 June 2015
Downloaded: 1674 times
New bank I made for Synth1,included 125 patches
It might have useful sounds for you!
Not into modern much,but if you love retro,oldskool just like me!

(There is a small FAQ txt file inside,read it if you interest!)

Quick download (For guest,without login)
https://app.box.com/s/ut3p8llbp9vzr6tu1z6h7ft0xpjyqcyj

Be sure you have latest version of Synth1! To make the bank work at full efficient!
(Updated 26/2/2016) Included Bonus Patches!
 
Gaura-Nitai-LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 9 June 2015
Downloaded: 902 times
A New One and not bad.Lucknow13(Lloyd McKay)
 
thanks Ms Ichiro 07
for Synth1 [Show all for]
by aaa bbb [Show all by] on 3 May 2015
Downloaded: 1096 times
sound bank for Synth1
 
DECA
for Synth1 [Show all for]
by lucknow13 [Show all by] on 13 April 2015
Downloaded: 1213 times
Synth 1 bank of 128 Patches. Its a good day. Goooood.lucknow13-(Lloyd McKay).
 
Colors of Synth1
for Synth1 [Show all for]
by sagamusix [Show all by] on 22 March 2015
Downloaded: 1701 times
Colors of Synth1
128 free Synth1 patches by Saga Musix
http://sagamusix.de/

version 1.0 - released 22 March 2015

Free to use, but give credits if you're feeling nice. :)

Patch names with "touch" in the name indicate that Aftertouch MIDI messages will give you some nice modulation effects.

Some patches require Synth1 1.13 Beta 2 or newer as they make use of the low-pass diode ladder filter.
 
thanks Ms Ichiro Synth1 banks
for Synth1 [Show all for]
by aaa bbb [Show all by] on 21 March 2015
Downloaded: 1157 times
some new sound banks for Synth1
sorry, I do not have time to reorganize them better
 
Janus lk
for Synth1 [Show all for]
by lucknow13 [Show all by] on 9 March 2015
Downloaded: 1337 times
A new full bank for Synth 1 plus a bank for HG Fortune's LPM. March 9 2015. Cheers- lucknow 13 (Lloyd McKay)
 
Synthematic Synth1 Bank
for Synth1 [Show all for]
by syntheticillusion [Show all by] on 11 December 2014
Downloaded: 1255 times
All Sounds by Joel Bisson.
 
Euro-Nam Bank 118
for Synth1 [Show all for]
by KoolKool [Show all by] on 13 November 2014
Downloaded: 1544 times
My first-made full on soundbank with 118 patches...
This bank can't into modern trance/techno,but can be useful for light dance genre such as: spacesynth,eurobeat,old eurodance...or..maybe synthpop...
Hope you guy like it!
Quick download link: app.box.com/s/jk52n6e19o3v56phkdg6
 
Hanz Meyzer Dance In The Bureau Presets
for Synth1 [Show all for]
by Hanz Meyzer [Show all by] on 3 November 2014
Downloaded: 1254 times
Hanz Meyzer - Dance In The Bureau
Synthwave Soundbank for Synth1 by Jurek Raben

All 16 presets from this song entry for the KVR OSC #68 competition (Synth1 only track):
https://soundcloud.com/hanzmeyzer/dance-in-the-bureau-synth1-only

Download all osc68 tracks:
https://archive.org/details/OSC68Synth1

KVR OSC #68 page:
https://sites.google.com/site/kvrosc/osc-68-synth1

Forum thread:
http://www.kvraudio.com/forum/viewtopic.php?t=421700
 
RichardSemper
for Synth1 [Show all for]
by RichardSemper [Show all by] on 31 October 2014
Downloaded: 1395 times
Here's some patches I created during the KVR One-Synth Challenge for October 2014 and December 2016. Hope you find them useful :)
 
Bryan Lake's Synth1 Presets
for Synth1 [Show all for]
by Sound Author [Show all by] on 17 September 2014
Downloaded: 1916 times
My first complete batch of presets for Ichiro Toda's Synth1. I started making these sounds over two years ago...pads mostly. This is the soundset that (more or less) spawned my sample library Project Pegasus.
 
Synthetic Illusion
for Synth1 [Show all for]
by syntheticillusion [Show all by] on 10 August 2014
Downloaded: 1493 times
Someone private messaged me a few months back to convert my previous upload to sy1 file format so I did with the latest beta 3 of V1.13 of Synth1, so I finally figured out how to do it with my own bank.
 
Kel bank
for Synth1 [Show all for]
by Kel [Show all by] on 20 July 2014
Downloaded: 1422 times
Some patches for synth1, wip (some acoustic emu).
Update jan 2015. 32 patches.

Updated for synth1 v1.13 beta3.
 
NISH-2011-Organs'n'Stabs
for Synth1 [Show all for]
by devilnishy [Show all by] on 14 June 2014
Downloaded: 1739 times
As in title. It's a bit of a rediscovered synth, so heres some of my old presets for you all. Works with latest update.
 
uncle236 Electro bank
for Synth1 [Show all for]
by oz236 [Show all by] on 14 June 2014
Downloaded: 2087 times
128 pathes Electro bank
 
Teksonik 04
for Synth1 [Show all for]
by Teksonik [Show all by] on 10 May 2014
Downloaded: 1590 times
Just 12 patches this time. Hope you find them useful !
 
Synth1 AZ Bank 3
for Synth1 [Show all for]
by AZZZ [Show all by] on 11 July 2013
Downloaded: 2988 times
100 patches.
http://bji.yukihotaru.com/
 
RetroHead GMulator for Synth1
for Synth1 [Show all for]
by 1-2-Many [Show all by] on 11 June 2013
Downloaded: 2142 times
A set of three banks for Synth1, the first of which an effort to improve the GMish factory bank that comes with synth1. The other two being extras made along the way.
 
Tonius Synth1 banks
for Synth1 [Show all for]
by timius [Show all by] on 24 May 2013
Downloaded: 2212 times
Around 170 presets for synth 1.
More info at : http://www.kvraudio.com/forum/viewtopic.php?p=5366653#5366653
 
Synth1 AZ Bank 2
for Synth1 [Show all for]
by AZZZ [Show all by] on 17 May 2013
Downloaded: 2661 times
90 patches.
http://bji.yukihotaru.com/
84 hi-quality presets + demos kits including flp files for fl studio and construction kits for other daws
Pack is fantastic for any kind of trance and hard trance music, a bit for techno and chillout/ambient. Good for other electronic music too.

Kick hi hat and clap generally are just for addition-they are not in the pack.

Use with care
Iâ??m not responsible for any damage of anything (ears,speakers etc)
 
BIGTONE synth1 presets
for Synth1 [Show all for]
by brok landers [Show all by] on 14 January 2013
Downloaded: 4750 times
127 presets. do whatever you like with them. please keep the BT in the file names. credit me, if you want. i have not botherered to sort the presets. made with synth1 v. 1.11.

note:
as the delay is _always_ in sync to host with synth1, they might sound not as good as programmed in different host speeds. i made the sounds on 120bpm.
furthermore, always check modwheel, pitchwheel and aftertouch assignments, as noted in the preset names, i.e. (mw+pb+at). otherwise quite some presets don't come alive or don't make sense at all.

have fun!
 
Yaka Synth1 Bank
for Synth1 [Show all for]
by YaKa93 [Show all by] on 13 January 2013
Downloaded: 2407 times
128 patchs generate with 'Synth1 Tools' and 'VPG' and reworked one by one
 
Synth1 AZ Bank
for Synth1 [Show all for]
by AZZZ [Show all by] on 10 November 2012
Downloaded: 3160 times
109 Patches
http://bji.yukihotaru.com/
 
Bomfunk Soundset
for Synth1 [Show all for]
by acidman_acidman [Show all by] on 23 August 2012
Downloaded: 2784 times
Here is the soundset for some most popular bomfunk songs from in stereo album. Synth1 is considered as the most powerful VA deservedly available on PC. Below is the demonstration of its sounds.
http://www.youtube.com/watch?v=jk1bUsmsd_8
Enjoy!!!
 
Lemur Template for Synth1
for Synth1 [Show all for]
by shimoda [Show all by] on 17 July 2012
Downloaded: 2118 times
I wanted to make another dedicated VST template for a great free VST, the Synth1. You can easily find it online and it is a fabulous VAS based on the architecture of the Nord Lead 2 by Ichiro Toda. The VST is also recently available for Mac, though I'm not sure where the ccm settings file would go on Mac. Unzip and make sure to place the ccm file in the Synth1 settings folder. Load up Synth1, click on the Opts button and under the MIDI tab, load the Synth1 file (LeSynth1.ccm). Everything (except poly voices selector-not available for remote control) will be adjustable from dials/switches on your screen with the notable exception that you will have to expand the LFO window to reach all LFO parameters. You can set the Midi Channel for this template. All objects are additionally set to Parent Midi so if you want to set this to a Midi output from Lemur different than MIDI 0, click on the Parent object/Midi Settings in the editor and change it to whatever MIDI out you have set up. Please leave feedback on the forums.

http://liine.net/en/community/user-library/view/282/
 
TNK's Analog Dream synth1 soundbank
for Synth1 [Show all for]
by tnkdesbois [Show all by] on 9 June 2012
Downloaded: 5896 times
The Analog Dream soundbank for synth1.12 (or higher), designed by TNK.

128 free patches available on http://www.kvraudio.com containing leads, basses, pads, keys & FXs, all sounding very analog and warm. Hope you'll enjoy them and use them to create awesome tracks !

Installation instructions, legal notice, patch list & many more in the .pdf file included in the .zip file. Video demo available demo on a famous tube for you :-)
 
Dubstep and DnB Patches
for Synth1 [Show all for]
by Xenos [Show all by] on 9 May 2012
Downloaded: 4017 times
20 Basses (Wobbles, Reeses, Subs, etc)
7 SFX
4 Leads
2 Drums
1 Arp
1 Chiptune Synth
 
Nine of Kings' bank
for Synth1 [Show all for]
by nineofkings [Show all by] on 3 March 2012
Downloaded: 2600 times
A group of presets in no particular order. Originally I made this bank for myself, but I thought that it might be useful for others. If not, it's free, so no harm done. My "hello world" synth bank.
 
Sinusoidal NIghtmare\'s Synth1 Bank (16 patches)
for Synth1 [Show all for]
by sin night [Show all by] on 23 November 2011
Downloaded: 2415 times
16 patches for Synth1 created with version 1.13 beta6 on mac.
 
Welcome2Mac
for Synth1 [Show all for]
by Summa [Show all by] on 6 October 2011
Downloaded: 2833 times
Welcome2Mac Set created October 2011 with Synth1 v1.12 2010.5
=========

is a tribute to the Mac Version of Synth1, containing 32 newly programmed Synth1 sounds. Make sure to use mod wheel for realtime control of the sounds. Note that "Narrowband Lead" is using Pitch Bend for bipolar Filter control.

Copy all files in one of your Synth1 soundbank folders.

For more free synth sounds visit:

http://www.summasounds.de/

Enjoy!
Summa


=========
Terms of Usage

The Usage within commercial and noncommercial music productions is welcomed...

Please note that a commercial release complete, partly or as part of a library isn't allowed without
special permission from summasound.de!!!
A noncommercial release is permitted but sounddesigner and website must be menitoned...
 
Dark Equinox-LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 10 September 2011
Downloaded: 4479 times
Sept 2011. My latest bank for Synth 1. Fx,Pads,Arps and general oddness. Hope You Like.lk(lucknow13).
 
Kujashi Synth 1 Bank 4
for Synth1 [Show all for]
by Schiffbauer [Show all by] on 12 July 2011
Downloaded: 3260 times
My fourth Synth 1 Bank - A full bunch of Vangelisque, Sequencer and FX/FM sounds
 
Kujashi Synth1 Bank 3
for Synth1 [Show all for]
by Schiffbauer [Show all by] on 12 July 2011
Downloaded: 3194 times
My third Synth1 Bank - A full bunch of Vangelisque, RMO, Perc, Synth and natural sounds...
 
P0LARS-LK 2011
for Synth1 [Show all for]
by lucknow13 [Show all by] on 6 April 2011
Downloaded: 4387 times
Just reedited to be under Synth 1 and not Synth One.lk
 
Vivolator Synth1 patches
for Synth1 [Show all for]
by bstageboss [Show all by] on 16 February 2011
Downloaded: 4283 times
A dozen patches for Synth1 done just for fun.
 
Kujashi Synth1 Bk2
for Synth1 [Show all for]
by Schiffbauer [Show all by] on 16 February 2011
Downloaded: 3754 times
My second Bank for this...
 
OZAmbient LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 4 December 2010
Downloaded: 4330 times
Latest Experiments with Synth 1. Have Fun.
lk.
 
X-Ploded-LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 3 November 2010
Downloaded: 5188 times
Most Recent as of October 31st 2010. Hope you Enjoye it lucknow13 LK Bye!
 
z13-Caution-z13 lk
for Synth1 [Show all for]
by lucknow13 [Show all by] on 16 October 2010
Downloaded: 3235 times
Another new bank for Synth 1. Eccentric pads, Mordor rhythms,Caustic leads,Singing Ginseng, Have it.LK
 
Phuturama-LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 30 September 2010
Downloaded: 3867 times
A 128 aggresive ambient bank for Synth 1.Put in It's Place. Have Fun.LK
 
Phuturama-LK
for Synth1 [Show all for]
by lucknow13 [Show all by] on 25 September 2010
Downloaded: 2610 times
A new Aggresive Ambient Bank. Hope you like IT. Have the fun.lucknow13.
 
LK-Monstronomo
for Synth1 [Show all for]
by lucknow13 [Show all by] on 2 July 2010
Downloaded: 3943 times
This is a 128 patch bank for Synth 1. rythmic pads,arps and xperiments. Enjoy lk
 
LK-Kultura Synth1
for Synth1 [Show all for]
by lucknow13 [Show all by] on 3 June 2010
Downloaded: 3954 times
This is a new 128 preset for Synth1.Great Synth updated.LK
 
Dogmeat Saws Bank
for Synth1 [Show all for]
by Dogmeat [Show all by] on 10 May 2010
Downloaded: 3757 times
Saws are generally the same. Could be interesting for those who look for dark sounded reeces and other saw type sounds with mass chorus values.
 
Synth 1Luck\"s Rainbow bank
for Synth1 [Show all for]
by lucknow13 [Show all by] on 30 August 2009
Downloaded: 5598 times
This is a full bank for synth 1 that I made a while ago and uploaded here but it isn't here anymore? so I decided to upload it again.
 
bladerunner bank 0.5
for Synth1 [Show all for]
by do_androids_dream [Show all by] on 26 August 2009
Downloaded: 4896 times
64 patches that i find useful in my own music. plenty of vintage style patches with a few lush pads thrown in for good measure. a mixed bag really. enjoy :)
 
Synth1 bank (by Lunatique) (updated)
for Synth1 [Show all for]
by Lunatique [Show all by] on 16 July 2009
Downloaded: 4965 times
This is an updated version of the previous version, with a few patches tweaked to have more modwheel expression.
 
Kaiyoti Bank 01
for Synth1 [Show all for]
by kaiyoti [Show all by] on 28 June 2009
Downloaded: 4909 times
64 patches consisting of:
Drums/Percussion
Plucked Strings
Pads/Drones
 
Create:Audio Presets 45
for Synth1 [Show all for]
by kevosince85 [Show all by] on 14 May 2009
Downloaded: 4404 times
45 Presets for Synth 1 by Create:Audio. Zipped Archive.
 
Bank2
for Synth1 [Show all for]
by peterdh [Show all by] on 28 February 2009
Downloaded: 4333 times
Bank of 100 patches for Synth1 V1.07. In this soundset you'll find synthbasses, synth brass, synth flutes, arpeggio's, gated sounds, TB-103 sounds, soundfx and more.
Genre: Mainly Dance.
 
Soundbank 09
for Synth1 [Show all for]
by mickygemma [Show all by] on 25 November 2008
Downloaded: 7366 times
This is the old bank but all full
 
Synth 1 Teskonik 2008-Edit
for Synth1 [Show all for]
by Teksonik [Show all by] on 19 October 2008
Downloaded: 5370 times
This is an edited version of the bank I uploaded a few days ago plus a few extra presets.
 
Synth1 bank (by Lunatique)
for Synth1 [Show all for]
by Lunatique [Show all by] on 8 September 2008
Downloaded: 5132 times
I have tried my best to match the volume of all the presets, so they are all relatively at similar volumes, and no matter how hard you play any of them the volume shouldn't clip (even with giant 10-finger chords at hardest velocity). I also labeled them all with proper prefixes like [ARP], [BASS], [PAD], [FX], [LEAD]...etc and color-coded as well.
 
HardCore BD By DjSdistorsion
for Synth1 [Show all for]
by djsd [Show all by] on 26 July 2008
Downloaded: 5470 times
Synth1 peut aller très très très loin , mais ce qu'il fait de mieux en matière de percussions c'est bien les Bass Drum !
 
Synth1 BE Random Patch
for Synth1 [Show all for]
by ballacr75 [Show all by] on 21 July 2008
Downloaded: 4010 times
This is one bank of 128 new sound for Synth1 created with my Synth1 Random Patch Generator.xls
Try this and retur your impression to me.
ballacr75@libero.it
 
Hoover patch
for Synth1 [Show all for]
by b0nk [Show all by] on 1 October 2007
Downloaded: 4851 times
Hoover sound refers to a particular synthesizer sound in electronic music, commonly used in Hard House music and other styles.
 
Sounbank09
for Synth1 [Show all for]
by mickygemma [Show all by] on 13 September 2007
Downloaded: 4346 times
Es muy divertido retorcer botones de este sintetizador virtual.
 
Dovers Synth1 Bank
for Synth1 [Show all for]
by dover666 [Show all by] on 15 July 2007
Downloaded: 6715 times
Here's a 128 patch bank i put together last fall.... Large variety of various sounds, some very nice pads and leads.... this was done on the 1.06 i think....
 
Ouroboros Bank 3
for Synth1 [Show all for]
by ouroboros [Show all by] on 13 June 2007
Downloaded: 6567 times
128 Synth1 patches.
Business in the front, party in the back.
 
Trance and Techno Patches
for Synth1 [Show all for]
on 29 August 2004
Downloaded: 14571 times
 
SOS NordLead II
for Synth1 [Show all for]
on 23 April 2004
Downloaded: 13776 times
 
Techno Essentials
for Synth1 [Show all for]
on 14 December 2002
Downloaded: 13848 times
 
The 80s
for Synth1 [Show all for]
by NEKO [Show all by] on 28 November 2002
Downloaded: 10889 times
 
Synthhunter
for Synth1 [Show all for]
on 20 November 2002
Downloaded: 11015 times
 
SG Bank 1
for Synth1 [Show all for]
by synthgeek [Show all by] on 20 November 2002
Downloaded: 8141 times
 
Toast
for Synth1 [Show all for]
by mistertoast [Show all by] on 20 November 2002
Downloaded: 7665 times
 
128 Synth1 Presets
for Synth1 [Show all for]
on 1 November 2002
Downloaded: 13479 times
 
Teksonik Synth1
for Synth1 [Show all for]
by Teksonik [Show all by] on 1 November 2002
Downloaded: 11532 times
Discussion: Active

Discussion

29 August 2012 at 6:06pmrifftrax

briandc... using a VST fail *facepalm*

29 August 2012 at 7:07pmchk071

Mhh... so a 5/10 rating, because your Linux software isn't capable of running VST's correctly? Just saying, because on any Windows host i tried Synth1 in, the arp, delay and polyphony work correctly... there's also no need to improve the synth, but the software you tried it in.

22 January 2013 at 7:03pmdragonslayor

Linux runs on UNIX, windows does not.

THIS POST HAS BEEN REMOVED

19 May 2013 at 6:29pmas.erwin

What does that even mean? Unix is an operating system, Linux is a kernal that drive other operating systems... the statement makes no sense. Might as well claim that Windows runs on Mac.

19 August 2016 at 6:02amArgon2005

No Prolems running this VST under Linux - using Reaper. Everything works fine.

29 August 2012 at 10:10pmgLOW-x

May be you'd better stop now using this configuration.Because you obviously don't know how to use VSTs on Linux.A lot of users reported Synth1 working perfectly with Wine or Vestige.

You'd better stick with Windows or Mac OS X...or learn HOW to use VSTs on Linux.

But if you post bad reviews every time a VST don't work right on Linux, you are going to use your fingers soon.

Reviews are not for troubleshooting things like "this VST don't work on my Linux with a beta wrapper" if you know what i mean ;)

ppl will be hard (like me) but you really searched it by playing the 'i'm smart because i use Linux to run VSTs" whereas you can't even use the simplest and most stable simple freeware synth

31 August 2012 at 4:02pmbriandc

If you can link me to others who run it in Vestige without problems I'd be very grateful. :)

30 September 2013 at 9:35amgodly

Hey guys, I'm intrested in synth1 on linux also, I think briandc is onto something, can you help us out?

THIS POST HAS BEEN REMOVED

31 August 2012 at 7:07ambriandc

Maybe it would be better to deal with the message, rather than just shooting the messenger??

I've tried about 200 different free VSTs in VeSTige. Many of them have nice working interfaces, good arpeggiators, mono/poly functions that work just fine.

It's not my fault that Synth1 doesn't perform as well. (I even re-installed it, thinking the md5sum was bad. No difference.)

Oh, one more thing: some of the patches actually make Synth1 crash. (Something that no other VST instrument I've tested does.

5/10.

Why should I lie?

THIS POST HAS BEEN REMOVED

THIS POST HAS BEEN REMOVED

1 September 2012 at 9:09pmwikter

I think that all the reviews should respect the fact that testing adapters in beta stage the results depend on the adapter and not the plugin. This review about a linux adapter is out of place...

2 September 2012 at 12:32amglokraw

Festige will do about 50% of vsts in linux, dssi-vst about 20%, while reaper

is about 90%, and you need nvidia graphics, and pci audio, or the numbers go down somewhat,

as the gui are often the failpoint. Synthmaster creations fail the most, some Synthmaker apps have a

few quirks, module dependant, while dongled apps, or those with custom copy protection intertwined with windows code unsupported by wine, always fail. As they should!.

Wine has proven to draw gui better this year than last, as is it's history. New linux users who are musicians, should avoid updating a working daw box to the 'newest' linux, but they fall for it over and over and over.

Musicians with supported hardware, a linux using friend, or the desire to learn the OS beyond audio production, have a bright future, as at least 5 audio production distributions are improving apace.

The 400 meg Studio 1337 (yeah, Steinberg, I said 'meg') is astounding. Pro-Tools needs that much code

just to use a mouse. @ briandc, for best longterm 'luck', become familiar with puppy, rpm and deb based

distributions. The hardware detection and support are different, and nuances of software are different.

A particular failure in one type of distro, is often fine in another.

The crashes based on Synth1 presets are probably based on not using reaper to host your plugins,

or an arcane sublimity in wine math calculations not liking a motherboard chipset.

I experienced some of those, but not in the last three years. A sound designer

I asked looked at the presets, and saw no obvious symptoms.

Cheers

5 September 2012 at 3:37pmStudioDave

Just a note to say that I've been testing Synth1 with the Festige software on AVLinux 5.0.1. It works nicely here, and I've been testing it with various soundbanks. Great synth, very straightforward design with excellent sound quality.

I won't give it a rating, I agree that it's a bit bogue to evaluate a Windows-based VST while running it on Linux. But as I said, IMO it's a great synth.

8 September 2012 at 12:22amHooj

Been using Synth1 for about 18 months now! I've auditioned just about every (popular) synth on the market (especially the FREE ones). I hate to admit this but Synth1 is even better than a few of the "paid version" synths. If you know synthesis, you can achieve some very nice sounds from this synth.

Don't judge it based on the many presets available. Instead, use them as a "guideline" and create your own according to your needs & style of music.

13 September 2012 at 9:02ambriandc

I am aware that VSTs are made for Windows. FeSTige is made to run these apps in Linux, and many of them work very nicely. (I'm using KXStudio, which is built upon Ubuntu Studio, which is Debian-based.)

So my point is, if other "less popular" VSTs work so well, it's a shame that this synth, which has been highly regarded here at KVR, is not able to work correctly. At least, not on KXStudio. Maybe AVLinux is better, but I don't know, since FeSTige should be the same in either distro.

So there must be something in other VSTs that make it more compatible, that is missing in Synth1.

Again, it's not that I can't get Synth1 to work at all. It works. But the arpeggiator doesn't, and the mono/poly control is a bit confusing, since sometimes it indicates "poly" but I can't get more than one note at a time. Finally, some sounds cause it to crash entirely.

The people at KXStudio are currently working on the issue, so hopefully we'll see things change soon. Especially since I'd really like to be able to use this synth to its fullest. :)

brian

13 September 2012 at 4:15pmjuandaco

Hi briandc. I have Synth1 running perfectly smooth with a configuration similar to yours, but with Reaper and wineasio. I know that Reaper is propietary software, but in not expensive, plus it has really good VSTis support under Linux. I have regular Ubuntu 12.04 with KXStudio repositories. You just need to install "wineasio" (should be installed with KXStudio) and install Reaper. Mine works flawlessly. Hope this helps.

13 September 2012 at 6:28pmjuandaco

Hello again brian. I managed to run Synth1 also with dssi-vst. Just type in a terminal vsthost followed by the path of the dll for Synth1.

14 September 2012 at 8:43ambriandc

Hi juandaco,

thank you for taking the time to help me out. :)

I have tried dssi-vst, but it didn't behave any better than FeSTige (still had no luck with arpeggiators, mono/poly, etc). But I will certainly take a look at Reaper.

I have wineasio installed in my KXStudio installation, and the people behind the project are working on integrating Synth1 into the Carla host. If that succeeds it'll be a great step ahead for the entire community, imo..

brian

15 September 2012 at 4:18pmbriandc

Silly me! I already had a Reaper demo in KXStudio!! (insert facepalm here)

So anyway, a very happy ending. Synth1 is now working just fine, arps, polyphony and all. And no presets cause crashes. ;) Lots of neat effects and things, too.

I don't know if it's my favorite yet, but I certainly give it an 8. The controls are clear and responsive. Very nice! :)

brian

29 October 2012 at 12:40amsteven96663

New to this. My first post. Have to contribute 10 posts before I can rate and review this truly excellent free 10 out of 10 gem. Been loving this one for simply ages. It's the cats pyjamas. Oops, I guess I just reviewed and rated it ;o) Only another 9 posts to go, then I'll give this Synthesiser the proper review I feel it deserves.

19 February 2013 at 6:59amarkmabat

The website in English... yay!

4 June 2013 at 10:49amgodly

Damn, I need it in Dutch! LOL.

3 June 2013 at 12:46pmgodly

I'm having troubles editing the synth knobs from Intone Keys host. Every time I touch a knob, the CPU goes to 50% and the plugin is freezed for a sec. I don't have any probs with other synths...

Could it be because of the 9000+ presets loaded? Removing them didn't make any difference, because the banks associations are still there and loaded in the VST host.

3 August 2013 at 10:44amgolemus

This tune is made solely by synth 1 (at least 95% of sounds): https://soundcloud.com/dreaml4nd/dreaml4nd-synth1-draft1.

15 August 2013 at 10:42amrosko12

Hey what does the "det" knob do on osc1 (I'm using current version of mac synth1). Certainly doesn't just simply adjust pitch. Usually detune would require more than one voice. It makes it sound quieter like a super weak sounding hoover. It's totally rubbish. Is it a mistake?

3 November 2013 at 1:56amshradenlüben

9/10 because it needs to become an AU instrument.

THIS POST HAS BEEN REMOVED

18 May 2014 at 10:54pmAudio Freak

Is the current version 1.12 Windows download set up to work in 64-bit Windows7 ??? If so, is the install pretty straight forward and does it include some presets (how many?) thanks in advance...

30 August 2014 at 6:46amcolossus21

I don't get this working on mac (10.8.4). I install it but logic wont recognize it, and wont appear in au list. what to do? it says not apple supported au or something.

THIS POST HAS BEEN REMOVED

THIS POST HAS BEEN REMOVED

28 November 2014 at 5:37ammarkcarr

I just loaded synth 1 and five banks of presets to get started. Call me silly? I'm sure someone will. I cant seem to get any of the banks to load. Can someone give me advice on how to load presets into this thing? Is it supposed to come with initial presets? It seems make one sound on all the preset choices.

25 December 2014 at 6:30pmrooter0442

how do you download one of these lol.

26 January 2015 at 1:10amBlackWinny

I've just found a very nice tool to manage the banks of Synth1. It's a quite old tool but it could still interest probably all the Synth1 users. It is very simple to use... and of course it is free:

http://designermonkey.rekkerd.org/dl.php#footer

3 July 2016 at 1:17pmviceverser

Win only : (.

3 July 2016 at 1:48pmBlackWinny

Are you joking !?

Beside the picture at the top of this present page you have two links "Download". One is for Mac ! And where does it drive you ? To the links for MAC ! And not only in 32-bit but also in 64-bit .

3 July 2016 at 1:55pmBlackWinny

Ah yes... I understand now... you were talking about Designermonkey, not about Synth1 itself.

I'm pretty sure that there is somewhere an equivalent for OS X.

But in fact it is a management tool which makes a bit easier the management of the banks, and if you use the zip format (which is perfectly managed by Synth1) you could certainly make your own equivalent using a script language.

But I'm pretty sure that there is somewhere an equivalent of Designermonkey for OS X.

21 May 2015 at 1:50amkobraaji

please a Linux version.
Linux users would be very grateful.

thanks.

9 June 2015 at 12:46pmrasputin

On a completely different note:

1. Newer versions, with whatever other bug fixes and enhancements may be included, is essential due to the new patch-maintaining system.

2. As someone pointed out, google translate does a nice job, at least in English, of translating Toda-san's website. Give it a try.

3. His operation guide is concise and useful, but there are a couple controls that don't seem to be documented labeled "det". Does anyone know what they do?

Thanks for your help, .

GY Rasputin.

THIS POST HAS BEEN REMOVED

9 June 2015 at 1:27pmsjm

det - osc/unison detune.

THIS POST HAS BEEN REMOVED

15 June 2015 at 9:52amocmtime

the new LPLD filter in 1.13 beta 3 2014.7 has a bug that generates a CPU load of 100% when the amplitude release is maximum and the cutoff is modified in real time or with recorded automation immediately after altering the resonance and while playing fast alternating MIDI notes.

29 July 2015 at 5:34amJesus C

There is another bug when you link the saw LFO to the filter and automate the freq... the LFO sounds weird! and I notice a strange behavior on certain point when I'm linking to LFO the PWM and the FM using square oscillators, it's been a while... like one year, since Ichiro Toda made the last update... the past time was like 4 years waiting from 1.12 to 1.13 beta so, someday he will fix it.

(Ichiro Toda from Daichi Labs, The Synth1 Creator, if you read this, please make the program "Open Source" so we, the users, can improve the program and fix bugs... oh, and change the GUI for sure! I absolutely love this synth, I'm not using anymore Massive neither Sylenth1 or something else, this is incredible and I never imaginated that this would replace forever my commercial plugins, if you could hear what I've done with your Synth1... woah)

THIS POST HAS BEEN REMOVED

THIS POST HAS BEEN REMOVED

6 August 2015 at 4:17pmJesus C

Bugs found in Synth1 1.13 beta 3 until now:

>When you automate the LFO depth linked to the filter in saw wave using the mod wheel, it sounds strange.
>The Ping Pong delay sometimes acts like a normal delay and it doesn't pan around the stereo field
>Strange behavior in FM at certain points
>Sometimes the pitch bends triggers itself.

THIS POST HAS BEEN REMOVED

8 August 2015 at 9:27pmJesus C

I've found another bug on Synth1 1.13 beta 3:
>When you use the LFO in Saw linked to Amp, it sounds some strange clicks and pops, for example, you make a sound using det 40 FM 77m 2 osc +15 tune +51 ADSR 0-127-127-77 2 (same with filter) frq 33 res and sat 0 trk 127 Unison 4 det 96 pitch -12 with nothing above 2.5kHz and you add 2 LFO's linked to Amp in key, first at (1) and amt 100, second at (4) and amt 55; you will notice a strange behavior, that's really sad because I don't like those "clicks and pops" in a dark sound. It would be easier if I could upload a picture and show you guys : (.

30 August 2015 at 5:06pmSynthMastah

My banks are not displayed in alphabetical order. They are displayed by the number of characters in the filename. See this image below. How do I get them to display in alphabetical order? This is weird, Synth1 has never given such a strange thing before.

http://www.kvraudio.com/forum/download/file.php?id=4684

30 August 2015 at 5:36pmXFX

Hoiwz about saving them individual patches into a new bank in the order you prefer? Alphabetically? Most of the performers might save them in order of sequence for songs in a set. Then reload them for a particular performance program. Yet some of us save them by genre or sound type or by purpose, like FX and solo melody, monophonic, etc..

It's a cool synth. Programming it takes time. Try to find a work around solution. I think the idea behind it besides the obvious emulation of our favourite synth is being lightweight.

30 August 2015 at 8:46pmSynthMastah

I could go one by one and sort them myself but there's no guarantee that will work. And there's hundreds of them. Too labor intensive. And Synth1 does sort them right on my other two PCs. It's only my new laptop with a clean install that gets it wrong. Here's my other computer that gets it right (picture on link).

http://www.kvraudio.com/forum/download/file.php?id=4685

THIS POST HAS BEEN REMOVED

THIS POST HAS BEEN REMOVED

16 November 2015 at 2:10amkobraaji

Too bad that the best free softsynth (Synth1), does not support the best free OS (Linux) ...

17 November 2015 at 8:18pmMarlaPodolski

First of all, I have never seen that sort of non-alphabetical behaviour in Synth1. Very strange, indeed. You might have been good enough to list your OS when posting the issue, as I very much think it is a setting within your PC that is causing this. This is because you say only that one machine does this. That's the culprit if using same version synth and same OS on each PC. Can't help you if we don't know anything at all about your actual hardware. Next, let me tell you about Synth1 patches, banks and what I, personally, did about them: I have salted away every bank I think was ever released for this wonderful synth. One week a couple of years ago I was asked to 'babysit' some friends' recording studio while the owners were on a brief 1-week convention trip. The place was only open for a few of their friends to drop by, do a bit of independent work, etc., and I was there just to watch over things. I spent several days auditioning just about EVERY Synth1 patch from every bank, re-arranged them into more logical banks, by type and quality, and tossed out perhaps a THIRD of all patches, as they were clearly complete rubbish made by idiots. But in some cases I found the very best patches in banks that were 50/50 in usability. Even though I mainly play the best commercial synths, I love Synth1 so much and so respect its creator, Mr Toda, that I will always be using it when I can. The effort was great but well worth, and I have all patches just where I can access now in mere second or two. Consider doing patch re-banking to solve your issue, consider putting in some 'sweat equity' of your own for being given such a respected AND free gift.

I hope the lot of you complainers are aware that the latest couple of releases of Synth1 are BETA releases, and as such are not finished works and should be expected to have issues. If you can't handle this, why don't you simply install older versions and be done with all your grief?!?! I use version 12 still and have never had an issue - NO BUGS, NO COMPLAINTS. I am a working musician and simply have no time or tolerance for such nonsense. Why are you messing with betas, then having fits when you encounter trouble?

Regarding kobraaji's LINUX issue, DO note that almost NONE of the commercial plugins that cost real money are available for LINUX, so why would you think that a softsynth of the quality of Synth1 that is not only free but also took many years of unpaid labour to reach its current state would come in a LINUX version, which would take many more hours of free labour and testing to port into that Operating System format? I think the burden should be on the one receiving the gift of this synth, to install an OS on his/her machine that is more generally accepted for making music. Or use Wine wrapper and just stop complaining. Next, you kiddies will demand that someone appear at your door and play the synth FOR you! Why don't you all take on some RESPONSIBILITY for yourselves to make Mr Toda's gift work on compatible systems and stop all this ridiculous whining. Spoiled children you most certainly are.

18 November 2015 at 12:41amkobraaji

MarlaPodolski
"I'm a working musician and simply have no time or tolerance for nonsense"

very good; but usually the professional musicians really did not bother to discuss in forums free software (in this forum I could be tiesto :)

"Almost none of the commercial plugins that cost real money are available for Linux"

this is true, but more and more
u-he plugins (beta);
http://www.kvraudio.com/forum/viewtopic.php?t=424953.

"Why do you think a software synthesizer Synth1 quality that is not only free but also took many years of work paid not to reach its current state would come in a version for Linux?"

the quality of linux (not forget that it is linux and manages servers social networking and web browser you use every day)
just the fact opensource would do the job again as happened with oxefmsynth.

"Stop all this whining ridiculous. You certainly spoiled children are."

yeah, I'm a spoiled, and true artists too :)

You may never come to linux, but this is the forum to share thoughts respectfully.

Ichiro Toda, you have the best free softsynth the world, and although I can not enjoy it, thank you from the community. Linux once again in the wait :)
health and life...

18 November 2015 at 6:25pmMarlaPodolski

"yeah, I'm a spoiled, and true artists too :)" ... well, at least you are honest.

So ... didn't have time to cover all in my effort to defend Synth1, but I use LINUX Ubuntu everyday but mostly just to connect to the internet. I've toyed with doing audio/music and wasn't pleased with much of anything -- latency, behaviour in general, compat, you name it. Still have Audacity install, just in case must edit or playback and 'see' files, you know? Suggested Wine to you but actually I hate it, tho others love it.

Only use LINUX to be more web-safe. Otherwise, I think it is clunky and stupid. Devs calling their software "canonical" and other stupid terminology. It is no wonde to me that LINUX never really made the big leagues and never will, considering the goofs in charge of it all. They offer software that is compat, you go to all this extra trouble to download and install, and the stuff is crap or doesn't work at all -- like they NEVER test any LINUX software, free or commercial. Everyone running LINUX is a bunch of Ibiza fruits. Screw them.

Yes, I know, 'cause Synth1 is a freebie I am supposed to be too good to play it. Screw people who think that way, too. They aren't rich, famous and likely don't even have pot to pee in. Let them be losers and snobs and blind to good sounds and getting anywhere in music. I know a fantastic synth instantly when I heard this one. Mr Toda is a blessing to us all, even the dummies on snob sites. Let them waste their money on synths that have 300-page guides take two years to learn and four to get a decent sound! Meanwhile, some of us are livin' the high life, good lots of aclaim and don't associate with twisted wannabees.

Enjoy your Synth1. Some amazing presets if you hunt, and programming easier than on most synths and with few limitations.

16 December 2015 at 2:04amÄxxl Force

Hello everyone, .

I'm having some problems using this great sounding plugin. For me Synth1 seems to introduce latency when playing back. My MIDI notes are aligned to the grid but I can clearly hear, that the sounds from Synth1 are too late compared to the metronome. I used a negative delay to compensate and it was something between 30-40ms. It's not system latency because that way metronome and Synth1 would be delayed the same amount of time, right? It seems to affect all presets I tried so far. Any ideas?

best regards.

alex.

16 December 2015 at 8:27amMarlaPodolski

Axxl, Synth1 introduces no -- that is, zero -- latency. It must be something in your setup. What interface, what soundcard, how powerful is your computer? You did not spec any of these. The average cheapest interface these days should get you no more than about 6-7 ms roundtrip latency. Whatever the cause, Synth1 (or any other synth) has nothing to do with it. Latency is a system thing. Have compensation for latency in other plugins in your DAW? If not, why not. Good luck.

--Marla.

16 December 2015 at 3:07pmÄxxl Force

Marla thanks for you help.

I checked back and you're right, there are some presets like a kick drum for example that don't have "latency". So it must be the presets I've been testing. Is it normal that e.g. synth strings need 30-40ms to actually "be there"? If yes how can I tweak the settings so they are tighter, means need less time to build up the tone. At the moment when I align my synth strings to the grid they are too late.

I never played keyboards before. Maybe if a human is playing that synth he would correct that already in his playing if that's a typical behavior for synths?

thanks & best regards.

alex.

16 December 2015 at 4:44pmMarlaPodolski

Oh ...! That explains so much, believe it or not. I can tell you are a little new to softsynths and their behaviour, but that's fine. I think you explained the whole thing without us needing to talk gear and numbers for 15 minutes before solving.

Yes, indeed, it can take quite a few milliseconds for the strings to "be there"? Great way of putting it, by the way. Most folks will immediately just assume you had a setup/interface/line/DAW issue the minute anyone says "latency" because 99 times out of 100 ...

Okay, so ... some sounds and instruments, maybe most of all bowed-sounding strings, have very laid-back attacks when activated by a key on a controller keyboard, whereas most drum/percussion items have ultra-fast attack times. BANG, there's the snare or kick! A bowed note may go an entire measure before even reaching its full intended volume, almost like a true fade-in. Having little or no audible attack is a part of what can make stringed instruments sound so sweet, too.

Still need to guess, but I think this explains all about what you are hearing. Some FX plugins, limiters, compressors can have significant latency, with hope made up for by the workstation's Latency Comp settings, but almost no VSTI (plugin instruments) cause any latency in the first place (unless they employ their own on-board FX set heavy, etc.) That's what was puzzling when you mentioned latency and Synth1 in the same sentence.

So, what you are hearing with various soft-sounding string patches/presets and many other nice pad sounds is not actually latency but is instead a soft, slow volume increase happening along with a long and drawn out attack, the onset of the note. I'll admit, they can sound like true latency at times. Latency= nothing, no sound for X ms, then suddenly the overdue note. A swell with very soft attack=no sound, then gradually you begin to hear a little of the note, growing louder until it peaks. That's key: listening carefully, you should hear a little something albeit faintly with a swell. Put a graphic analyser plugin on there right after the instrument, and you should see at least a tiny rise of activity in some frequency (ies), even if very low dB. With true latency you see nothing, until note.

1 January 2016 at 3:06am

EDM Soundset for synth1 - 50 high quality EDM presets useful for many genres of EDM (Electro house, dubstep, future house, hard dance...), you can find lazers, leads, 808 bass, pitched hardstyle kicks, arps, dubstep synths, screeches, plucks and more !!.

Download here : https://sellfy.com/p/askw/

Enjoy ! :)

4 January 2016 at 10:28pmchtiviwonder29

Does someone already have a problem with Logic Pro X ? I have to click 1 cm under a key to active it .

13 January 2016 at 10:30amhoshino

Button sliders don't really work in Mac OS El Capitan. As soon as you click on any parameter, the mouse flies off to the other corner of the screen. Unusable.

6 February 2016 at 8:27amchtiviwonder29

Completely right with you hoshino .

5 March 2016 at 4:00pmmusicalmemoriesuk

Any beginners tutorials for synth1?

5 March 2016 at 6:12pmchk071

Check Youtube. Loads of those there. :)

THIS POST HAS BEEN REMOVED

12 March 2016 at 1:10ammusicalmemoriesuk

What is a good patch to start with from a beginners point of view?

12 March 2016 at 6:09pmJesus C

https://soundcloud.com/bedroomproducersblog/bigtone-synth1-sound-bank-demo
https://www.youtube.com/watch?v=5Y9WpPQXIII.

12 March 2016 at 8:33pmmusicalmemoriesuk

They sound good the pads.

13 March 2016 at 8:17pmmusicalmemoriesuk

Sorry for the newbie question but am I right in thinking to create a pad sound you use 2 sawtooth waveforms in both oscilators?

27 March 2016 at 9:07amchtiviwonder29

Hello .

I have a mistake with synth 1.

I load a MIDI track in Logic. I load a sound a sound from a soudbank. When i press play, the sound return on init sound .

Impossible to save the sound from synth 1.

Can someone help me ?

Thanks.

3 April 2016 at 1:21pmborges

Hi, .

Synth1 is awesome, the sound is very versatile.

But I have a problem of "shadow bank window" (stay in screen) ableton running in McOS platform.

Sometimes the window does not disappear, it does not react to mouse click.

I have to close abletonv in order to make it disappear.

Anyone have this problem? help.

Thank in advance.

Tu─črul.

4 April 2016 at 5:47pmchis

Borges: I can confirm the same happens under OS X Yosemite (various versions), with Synth1 1.13beta8 64-bit 2015.5.

I find that clicking on "List/Info" twice will hide this "shadow bank window".

4 May 2016 at 3:56amlouderr

WOW this synth sounds great! getting stable results with ableton/el capitan. so far, no issues at all. but the ugliness of the GUI was bothering me and i didn't like any of the skins i have seen on the web. so here's a very pretty skin i made by total random happy accident. it's called "plum", let me know if you like it! I think its very nice on the eyes :)

#50283c.

#c8c8c8.

6 June 2016 at 11:34pmatown0123

Guys, how do i load a specific preset on Ichiro's Synth 1 V1.13 beta (AU 64) 2015.5 on Logic pro x on my mac, i can't seem to find a way to open the .fxp preset i have in synth 1, i tried everything. Sorry for the possibly noobish question, thanks let me know :). Have a good one guys! Where do i put to .fxp file? When i click the opt button, these is no browse option in the mac beta version of synth 1.

25 October 2016 at 3:40pmtripleflows
1 November 2016 at 8:52amneonliston

Hi, Im having trouble using Synth1 with logic x mac.

Seems to crash once, then crashes again while re opening logic.

Can anyone give me some advice? is the latest version ok with mac?

Seems like a great synth with lots of 3rd party presets so id love to use it regularly.

1 November 2016 at 9:29amtripleflows

Hi, if you read my review (Blessing or Curse? A Synth1 Review) above you'll see that Synth1 has issues on Mac OS, while the Windows version is very stable.

Mac OS version has more updates than Windows, but still not functioning properly, I tested it in Cubase 8.5 and Logic 9 and had the same experience.

4 November 2016 at 2:48pmHudeenee

I have two major problems with the MAC AU version on 10.6.8 (32-bit):

-Logic/MainStage won't validate it, which is no biggie, if you bypass it.

-While switching presets sometimes it just makes a loud click (or a periodic clicking sound) and then becomes unresponsive. This can be handled with sending a MIDI panic message, but can be a serious PITA when you're using it live.

Does anyone know of a solution to these?

2 January 2017 at 6:26pmlucknow13

The Download page for this received a Page cannot be displayed? geocities.jp. Not working. Available anywhere else?

2 January 2017 at 6:44pmBlackWinny

http://www.geocities.jp/daichi1969/softsynth/#down

Then you choose the first link which appears bellow the blue title.

Or directly for the current 1.13 beta3 : http://www.geocities.jp/daichi1969/softsynth/Synth1V113beta3.zip

THIS POST HAS BEEN REMOVED

9 March 2017 at 9:40pmpcf

I have collected 173 free sound banks with over 14.000 sounds for Synth1 here: https://goo.gl/n8Jf7d

It's just one small ZIP file, with instructions on how to extract it and configure Synth1.

If you should know about other banks that I have missed, PLEASE email them to me at pc@frankplads.com and I'll include them in the next update. Thanks.

Hope it's OK to post this here, just wanted to make life easier for all us Synth1 fans. :)

29 April 2017 at 3:12pmmesuma

Hi, folks. I wonder if anyone has issues with Ableton, most recent Mac OS and Synth 1. I can't seem to get it to appear in either my VSTs or AUs. It used to, so I don't understand what has changed. Can anyone give me some pointers on getting my mac to recognize it again? Any help would be very much appreciated. Cheers!!.

30 April 2017 at 1:44amblortblort

Hi mesuma, I know it is sort of a nuisance to rescan your entire VST library, but that may help if you have not done so? Options>File folder>Plugin sources... hold down the Alt key when you hit the "rescan plugins" and that will start the ball rolling. Hope this helps.

30 April 2017 at 9:44pmmesuma

Yep, I tried that every few weeks for the Iast year in the hope it would somehow recognize it. eventually got it working as an AU yesterday but it doesn't open in my saved sets as the original VST. So I need to open my old PC and see what the sound was originally then re-program the VST. It's a pain and a bit risky as I'm sure my old lappy is ready to burst in to flames. Glad I got it back but it doesn't really solve the problem, just adds more work on. Thanks for your reply anyway, man. Much appreciated.

1 May 2017 at 1:59amblortblort

while I've not had THAT particular set of issues...esp with synth1, I am well familiar with the famous "I am now reaching around my butt to get to my other elbow" scenario. No fun any way you cut it. For what little it's worth in THIS case, I have noticed that over the versions (from about 7 to 9...) Live has gotten increasingly better about the total rescan... I own an embarrassing amount of plugs as I've been at this since God was a wee lad...and doing a total rescan in Live used to require several hours and moving shortcut alias's, etc etc... but now Live DOES seem to be able to 'pick up where you left off' in some instances when a scan crashes out...

That said- you MAY want to try installing synth1 to another location and then creating a shortcut to that location and pulling that shortcut into your Live VST library? may be worth a go? Hope this helps too?

1 May 2017 at 7:02amtripleflows

Although Synth1 has many some issues, especially on Mac it is still a great synth.

A review comparing the goods and bads: https://synthmorph.com/blogs/news/synth1-ichiro-toda-review-blessing-curse.

And a free Synth1 bank with some additional twist: https://synthmorph.com/collections/all.

4 May 2017 at 7:00amsavage808

this synth is absolutely amazing for a free plugin, but i am way bummed by its stability running logic 10.3.1 on OS Sierra 10.12.4 it will sometimes crash the whole program or it will make an extremely loud distorted noise randomly. logic is my only daw and i am dying to use this more stably. does anyone have any tips or suggestions?

Please log in to join the discussion

Synth1

Average user rating of 8.85 from 40 reviews

Ichiro Toda
 My KVR - Version Control & Lists
Not In Your MY KVR Groups
(or group limitation prevents versioning)
767 people have added Synth1 to 39 My KVR groups 956 times
+33 in private groups

KVR Rank (Based on page views)

Overall: 2  2  2

30-Day: 2; 7-Day: 2; Yesterday: 2

Advertisements