u-he

aMUSEd · Post by **aMUSEd** » Mon Dec 21, 2009 4:03 pm

bmrzycki wrote:
aMUSEd wrote:In fact there should really be a section for ZRev to encourage more people to save patches (currently you can only do this using the host though)
Hi aMUSEd,
I did add a section for Zrev. It's just not directly linked to the front page. If you go to the zebra preset section you'll see it there: http://u-he.com/PatchLib/zebra.html#zrev

Looking forward to hearing more Zrev presets from you.

Cool - I'm converting my Zebra Bugz bank to Zebrify now so you might want to make a Zebrify section too if you haven't already. First example posted here:

http://www.fingermarks.co.uk/music/Doomifier+.h2p

aMUSEd · Post by **aMUSEd** » Mon Dec 21, 2009 5:12 pm

First small bank for Zebrify - based on some of the patches from Zebra bugz:

Zebri-lo-fy

more to come.

Dave Bourke · Post by **Dave Bourke** » Mon Dec 21, 2009 9:46 pm

Is Doomifier for Zebra or Zebrify?

Kind regards.

aMUSEd · Post by **aMUSEd** » Mon Dec 21, 2009 9:50 pm

Dave Bourke wrote:Is Doomifier for Zebra or Zebrify?

Kind regards.

Zebrify

Dave Bourke · Post by **Dave Bourke** » Mon Dec 21, 2009 9:51 pm

OK. Thanks, aMUSEd.

Kind regards.

GoaMech · Post by **GoaMech** » Thu Jun 17, 2010 2:57 am

bmrzycki wrote:>> U-He Commercial & Free Soundsets <<

RSS Feed: New Sets

Please send me a PM if you want a your content posted, changed, corrected, or removed. I'll also take urls posted here and put them on the site.

Enjoy!

Unfortunately 50% of OSCilator files just don't work. Let's take SH101 for example. Each h2p loads "well" and name change, but sound remain same - it means zebra don't load it in proper way.

mcnoone · Post by **mcnoone** » Thu Jun 17, 2010 4:12 am

GoaMech wrote: Unfortunately 50% of OSCilator files just don't work. Let's take SH101 for example. Each h2p loads "well" and name change, but sound remain same - it means zebra don't load it in proper way.

Maybe you need move the wave knob a little first.
Try the wave control knob on the oscillator itself, or cycle through some of them under the wave table in the "more osc" section.

I never had this problem though.
Does this problem happen with all the wave files or only some?

Bronto Scorpio · Post by **Bronto Scorpio** » Thu Jun 17, 2010 4:19 am

GoaMech wrote:
bmrzycki wrote:>> U-He Commercial & Free Soundsets <<

RSS Feed: New Sets

Please send me a PM if you want a your content posted, changed, corrected, or removed. I'll also take urls posted here and put them on the site.

Enjoy!
Unfortunately 50% of OSCilator files just don't work. Let's take SH101 for example. Each h2p loads "well" and name change, but sound remain same - it means zebra don't load it in proper way.

You have to place them in the Zebra2.data/modules/Oscillator folder (on windows). Than all the nice Oscillator templates will appear in your oscillator presets window

They are NOT supposed to load as presets. You have to click on the little "default" in the oscillator section of zebra to load them (after you placed them in the right folder).

I hope I could help.

Cheers
Dennis

aMUSEd · Post by **aMUSEd** » Thu Jun 17, 2010 4:25 am

Thanks for posting my Kore templates. Some are not the most recent though - these are here:

Zebra 2.5 with user guide

Zebrify with user guide and example patch

ACE

Morphing template for ZRev

btw if Skydrive adds any _ to the filename just remove them - Skydrive seems to do this from time to time.

bmrzycki · Post by **bmrzycki** » Thu Jun 17, 2010 3:49 pm

mcnoone wrote:Maybe you need move the wave knob a little first.
Try the wave control knob on the oscillator itself, or cycle through some of them under the wave table in the "more osc" section.

I never had this problem though.
Does this problem happen with all the wave files or only some?

That was an older problem that Urs fixed in 2.5. It had to do with older OSC presets being slightly different from newer ones. The latest Zebra is now smart enough to tell if an OSC preset is old and will no longer require a wiggle of the wave knob to hear a change.

I think the other poster is right and the user tried to load them as regular presets.

I think I need to add installation instructions to each section...

bmrzycki · Post by **bmrzycki** » Thu Jun 17, 2010 3:51 pm

aMUSEd wrote:Thanks for posting my Kore templates. Some are not the most recent though - these are here:

Zebra 2.5 with user guide

Zebrify with user guide and example patch

ACE

Morphing template for ZRev

btw if Skydrive adds any _ to the filename just remove them - Skydrive seems to do this from time to time.

I cant seem to get to any of those, livefilestore.com is down for me.

Could you dump all of those into a single bigger zip and just shoot me a PM with it uploaded somewhere, say uploaded.to? I'll update the PatchLib as soon as I see those.

I'll try again later to see if livefilestore.com comes back too.

aMUSEd · Post by **aMUSEd** » Thu Jun 17, 2010 5:33 pm

bmrzycki wrote:
aMUSEd wrote:Thanks for posting my Kore templates. Some are not the most recent though - these are here:

Zebra 2.5 with user guide

Zebrify with user guide and example patch

ACE

Morphing template for ZRev

btw if Skydrive adds any _ to the filename just remove them - Skydrive seems to do this from time to time.
I cant seem to get to any of those, livefilestore.com is down for me. Could you dump all of those into a single bigger zip and just shoot me a PM with it uploaded somewhere, say uploaded.to? I'll update the PatchLib as soon as I see those.

I'll try again later to see if livefilestore.com comes back too.

MS are pissing around with it again - I can download if I go to the site - they just don't seem to like direct links. Anyway I've bundled them all into one zip here:

http://www.fingermarks.co.uk/music/Koreuhe2010.zip

latest versions of templates for:

Uhbiks
Zebra 2.5 (with user guide)
Zebrify (with user guide and example patch)
ZRev - with morphing snaps
MFM2 (with unholy knob of doom)
Filterscape and Filterscape VA
Zebralette

must get round to doing one for Zebra CM some time - I just rarely use it so the need hasn't come up

aMUSEd · Post by **aMUSEd** » Thu Jun 17, 2010 5:44 pm

Oh nearly forgot I was working on these - bonus bank of 3 morphing ZRev KoreSounds each with 8 snaps (so 24 patches in total + all the inbetweeners you can twist out of it)

http://www.fingermarks.co.uk/music/ZedRevMorphs.zip

bmrzycki · Post by **bmrzycki** » Thu Jun 17, 2010 6:16 pm

Thanks aMUSEd, I think that's sorted. I placed all the Zebra and Zrev into one large zip and the rest is updated in place. Let me know if you think something is incorrect or missing.

aMUSEd · Post by **aMUSEd** » Thu Jun 17, 2010 7:29 pm

bmrzycki wrote:Thanks aMUSEd, I think that's sorted. I placed all the Zebra and Zrev into one large zip and the rest is updated in place. Let me know if you think something is incorrect or missing.

Thanks - I think it needs to explain it includes templates for ZRev and Zebrify now plus a guide to getting the best use out of the Zebra and Zebrify templates within Kore 2.

Did you do anything with the other 3 ZRev Koresounds?

u-he

KVR Audio

u-he preset library